Brackets and mounts
Bench Vice Assembly with Swivel Base and Self-Centering Jaws
- Bounding box
- 400.0 × 400.0 × 150.0 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- August 21, 2026
Download
Free to download and use. See the terms.
The prompt
Detailed mechanical bench vice assembly, self-centering dual jaw mechanism, symmetrical left-hand and right-hand screw drive, rotating circular swivel base with clamping handle, dovetail detachable jaw faces, protective accordion bellows shield over screw, industrial metal finish, mechanical engineering model.
Parameters
| Name | Value | Range |
|---|---|---|
| Base diameter | 200 mm | 100 – 400 |
| Base thickness | 25 mm | 10 – 60 |
| Central pivot hole diameter | 20 mm | 8 – 60 |
| Mounting slot length | 30 mm | 10 – 80 |
| Mounting slot width | 8 mm | 3 – 25 |
| Mounting slot center radius | 80 mm | 50 – 95 |
| Clamping handle length | 150 mm | 50 – 400 |
| Clamping handle diameter | 15 mm | 5 – 40 |
| Locking stud length | 20 mm | 5 – 60 |
| Locking stud diameter | 10 mm | 4 – 30 |
| Vice body length | 250 mm | 100 – 600 |
| Vice body width | 100 mm | 40 – 250 |
| Vice body height | 120 mm | 40 – 300 |
| Body central bore diameter | 44 mm | 20 – 100 |
| Dovetail way depth | 10 mm | 0 – 30 |
| Lead screw height above base | 100 mm | 20 – 200 |
| Lead screw total length | 300 mm | 100 – 700 |
| Lead screw diameter | 20 mm | 8 – 60 |
| Jaw slide length | 100 mm | 20 – 300 |
| Jaw slide width | 60 mm | 20 – 150 |
| Jaw slide height | 70 mm | 20 – 180 |
| Slide embedment around screw | 20 mm | 0 – 50 |
| Gap between slide inner faces | 50 mm | 0 – 250 |
| Jaw face width | 80 mm | 10 – 150 |
| Jaw face height | 25 mm | 5 – 80 |
| Jaw face thickness | 8 mm | 2 – 30 |
| Bellows compressed length | 120 mm | 10 – 350 |
| Bellows outer diameter | 40 mm | 20 – 100 |
| Bellows inner diameter | 22 mm | 6 – 90 |
| Tommy bar length | 200 mm | 50 – 500 |
| Tommy bar diameter | 15 mm | 5 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent