Brackets and mounts
Belt Conveyor Frame Assembly
- Bounding box
- 762.0 × 310.5 × 291.5 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- September 26, 2026
Download
Free to download and use. See the terms.
The prompt
Parametric conveyor belt frame CAD model. Dimensions: - Overall frame: Length 762mm, Width 305mm, Height 254mm. - Material: Square hollow aluminum tubing 25mm x 25mm. Structure Breakdown: 1. Frame: Two parallel side rails (25x25mm) elevated on four corner legs (height 254mm). Connect side rails with cross members at each end flush underneath. 2. Bearings & Mounts: Add 4 pillow block bearing blocks (30x30x15mm cubes) mounted on top of the side rails at the four roller shaft ends. 3. Drive & Tail Rollers: Two main cylinders (Diameter 50mm, Length 250mm) centered between the rails, with 10mm diameter steel shafts extending 25mm out from both ends into the bearing blocks. 4. Support Idlers: Three 20mm diameter intermediate rollers placed inside the frame gap, lowered so their top tangent is flush with the main rollers. 5. Motor Mount: Add a flat rectangular side mounting plate (100x100x5mm) attached to the outer left side rail near the drive roller. Ensure no geometry clipping; position parts using explicit offsets and shaft mounts.
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Length (X) | 762 mm | 400 – 1500 |
| Frame Width (Y) | 305 mm | 150 – 700 |
| Frame Height (Z) | 254 mm | 120 – 700 |
| Square Tube Size | 25 mm | 12 – 80 |
| Cross Member Axis Height | 216.5 mm | 40 – 400 |
| Drive/Tail Roller Dia | 50 mm | 20 – 160 |
| Main Roller Body Length | 250 mm | 80 – 600 |
| Roller Axis From Centre | 320 mm | 60 – 700 |
| Idler Roller Dia | 20 mm | 8 – 80 |
| Idler Roller Body Length | 250 mm | 80 – 600 |
| Roller Shaft Dia | 10 mm | 5 – 40 |
| Shaft Extension Past Roller | 25 mm | 5 – 100 |
| Pillow Block Footprint | 30 mm | 12 – 90 |
| Pillow Block Height | 15 mm | 5 – 60 |
| Idler Support Post Width | 30 mm | 10 – 90 |
| Motor Plate Length (X) | 100 mm | 30 – 250 |
| Motor Plate Height (Z) | 100 mm | 30 – 250 |
| Motor Plate Thickness | 5 mm | 2 – 25 |
| Plate To Drive Roller Gap | 20 mm | 2 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu