Brackets and mounts
Beko BDIS 38040 A Modular Door Panel Assembly
- Bounding box
- 448.0 × 920.0 × 18.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- August 23, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D-printable door panel for Beko BDIS 38040 A. Dimensions: 448 W × 717 H × 18 mm thick. Origin = top-left rear corner. X right, Y down, Z outward. Create EXACTLY 4 blind pilot holes Ø2 × 14 mm on the rear face: * Upper left: X80 Y55 * Upper right: X368 Y55 * Lower left: X80 Y530 * Lower right: X368 Y530 All holes are symmetric around X224. Do NOT add any other holes. Make the panel hollow/lightweight for PETG FDM printing, not a solid block. Use 2.5 mm front/rear skins, ~3 mm internal ribs and reinforced mounting areas. Keep front and rear faces flat and overall thickness exactly 18 mm. Add ~1 mm outer edge fillets. Design as modular interlocking sections suitable for a Bambu Lab P2S, with hidden joints and alignment features. Target total weight: 4.5–8 kg, ideally ~5.5–6.5 kg. Generate a complete master assembly, printable parts, rear/front views and dimensioned technical drawing. All dimensions must remain editable parameters.
Parameters
| Name | Value | Range |
|---|---|---|
| Panel Width | 448 mm | 200 – 800 |
| Panel Height | 717 mm | 300 – 1200 |
| Panel Thickness | 18 mm | 10 – 40 |
| Front Skin Thickness | 2.5 mm | 1 – 5 |
| Rear Skin Thickness | 2.5 mm | 1 – 5 |
| Edge Wall Thickness | 3 mm | 2 – 6 |
| Internal Rib Thickness | 3 mm | 1.5 – 5 |
| Internal Rib Spacing | 40 mm | 20 – 80 |
| Outer Edge Fillet Radius | 1 mm | 0.2 – 2.5 |
| Stepped Lap Depth | 6 mm | 3 – 12 |
| Side Dovetail Depth | 4 mm | 2 – 8 |
| Side Dovetail Root Width | 4 mm | 2 – 8 |
| Side Dovetail Tip Width | 6 mm | 2 – 12 |
| Side Dovetail End Margin | 12 mm | 5 – 40 |
| Alignment Pin Radius | 2 mm | 1 – 4 |
| Alignment Pin Length | 8 mm | 4 – 16 |
| Alignment Pin Count | 3 | 2 – 6 |
| Mount Boss Diameter | 10 mm | 6 – 20 |
| Mount Boss Height | 6 mm | 3 – 10 |
| Pilot Hole Diameter | 2 mm | 1 – 4 |
| Pilot Hole Depth | 14 mm | 5 – 17 |
| Mount Hole X (left side) | 80 mm | 20 – 200 |
| Upper Hole Y | 55 mm | 10 – 200 |
| Lower Hole Y | 530 mm | 200 – 700 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent