Behind-the-Neck Bone-Conduction Headset

1 views

Bounding box: 135 × 112.5 × 22 mm
Engine: 3D Printing B-rep
Parameters: 38
Published: November 14, 2026

Download

Free to download and use. See the terms.

The prompt

i asked smthng like this

Parameters

Name	Value	Range
Central pod width	75 mm	50 – 100
Central pod length	50 mm	30 – 80
Central pod height	22 mm	12 – 40
Rounded corner radius	5 mm	1 – 12
Internal cavity width	65 mm	40 – 90
Internal cavity length	40 mm	20 – 70
Internal cavity height	16 mm	8 – 30
Wall / floor thickness	2.5 mm	1.2 – 5
Lid seam groove depth	1 mm	0.4 – 2
Lid seam groove height	1.2 mm	0.6 – 3
Micro-USB cutout width	12 mm	6 – 20
Micro-USB cutout height	6 mm	3 – 12
USB-C cutout width	10 mm	5 – 18
USB-C cutout height	4 mm	2 – 10
Slide switch slot length	9 mm	4 – 15
Slide switch slot width	3 mm	1.5 – 8
Push button hole diameter	6 mm	3 – 10
Push button spacing	18 mm	8 – 30
Ear pod outer diameter	45 mm	25 – 70
Ear pod height	22 mm	10 – 40
Transducer through-hole diameter	22 mm	10 – 35
Transducer recess depth	2 mm	0.5 – 5
Recess diameter allowance	4 mm	0 – 10
Microphone pinhole diameter	2 mm	1 – 4
Neckband width	15 mm	8 – 30
Neckband thickness	8 mm	3 – 15
Total neckband length	120 mm	60 – 200
Control pod length	32 mm	20 – 60
Control pod width	17 mm	12 – 30
Control pod height	13 mm	8 – 25
Control pod corner radius	5 mm	2 – 10
Position along arm (0-1)	0.42 mm	0.3 – 0.8
Arm button hole diameter	5 mm	3 – 10
Arm button spacing	9 mm	5 – 20
Arm button recess depth	4.5 mm	1 – 10
Mic node length	18 mm	10 – 30
Mic node width	13 mm	8 – 25
Mic node height	10 mm	6 – 20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS