Everything else
Battery tray plate with fin and strap slots
- Bounding box
- 125.0 × 80.0 × 19.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- October 8, 2026
Download
Free to download and use. See the terms.
The prompt
slots must be on one side of the fin. make them 50mm a part. start the edge slot 6mm from the edge and measure the 50mm from there.
Parameters
| Name | Value | Range |
|---|---|---|
| Platform width (X) | 125 mm | 60 – 300 |
| Platform length (Y) | 80 mm | 40 – 300 |
| Platform thickness | 6 mm | 2 – 20 |
| Leg inset from corner | 10 mm | 0 – 40 |
| Leg outside diameter | 12 mm | 4 – 40 |
| Leg height | 10 mm | 1 – 40 |
| Leg screw bore | 5 mm | 1 – 30 |
| Fin width | 2 mm | 0.8 – 10 |
| Fin height | 3 mm | 0.5 – 30 |
| Strap slot length (Y) | 25 mm | 5 – 60 |
| Strap slot width (X) | 3 mm | 1 – 20 |
| Slot centre spacing | 50 mm | 5 – 150 |
| Edge slot centre from edge | 6 mm | 2 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm