Brackets and mounts
Battery Stack with Electronics Placeholders
- Bounding box
- 120.0 × 80.0 × 54.8 mm
- Engine
- Precision B-rep
- Parameters
- 49
- Published
- October 12, 2026
Download
Free to download and use. See the terms.
The prompt
Add thInside the existing electronics enclosure, add simplified 3D placeholder components without changing the enclosure dimensions. Add an ESP32 DevKit board measuring approximately 54 × 28 × 12 mm, a relay module measuring 50 × 26 × 18 mm, and a signal-conditioning PCB measuring 40 × 30 × 1.6 mm. Arrange the ESP32 and relay side by side with approximately 6 mm clearance between them, ensuring all components fit inside the 116 mm internal length. Add a buzzer measuring 12 mm diameter × 9.5 mm height and a status LED measuring 5 mm diameter × 8 mm height. Route a simplified sensor cable from the enclosure toward the pressure sensor film. Use separate bodies and do not create electrical connections that are not physically represented.e electronics as placeholder components
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 120 mm | 80 – 200 |
| Base Width | 80 mm | 60 – 150 |
| Base Thickness | 6 mm | 2 – 20 |
| Clearance Hole Dia | 3.2 mm | 2 – 6 |
| Hole X | 55 mm | 20 – 90 |
| Hole Y | 35 mm | 20 – 60 |
| Nut Across Flats | 5.5 mm | 4 – 10 |
| Nut Recess Depth | 2.4 mm | 1 – 6 |
| Cell / Internal Length | 116 mm | 50 – 200 |
| Cell / Internal Width | 76 mm | 40 – 150 |
| Cell Thickness | 8 mm | 2 – 20 |
| Cell Corner Radius | 2 mm | 0 – 10 |
| Barrier Length | 116 mm | 50 – 200 |
| Barrier Width | 76 mm | 40 – 150 |
| Mica Thickness | 0.1 mm | 0.05 – 1 |
| Aerogel Thickness | 1 mm | 0.2 – 5 |
| Sensor Thickness | 1 mm | 0.2 – 3 |
| Sensor Length | 40 mm | 10 – 100 |
| Sensor Width | 30 mm | 10 – 80 |
| Pad Diameter | 6 mm | 2 – 15 |
| Pad Height | 0.5 mm | 0.1 – 2 |
| Pad X Spacing | 12 mm | 5 – 30 |
| Pad Y Spacing | 10 mm | 5 – 30 |
| Tail Length | 20 mm | 5 – 50 |
| Tail Width | 8 mm | 3 – 20 |
| Tail Thickness | 0.2 mm | 0.1 – 1 |
| Clamp Length | 120 mm | 80 – 200 |
| Clamp Width | 80 mm | 60 – 150 |
| Clamp Thickness | 6 mm | 2 – 20 |
| Bolt Shank Dia | 3 mm | 2 – 6 |
| Bolt Head Across Flats | 5.5 mm | 4 – 10 |
| Bolt Head Height | 2 mm | 1 – 5 |
| Bolt Length | 30 mm | 10 – 60 |
| ESP32 Length | 54 mm | 20 – 100 |
| ESP32 Width | 28 mm | 10 – 60 |
| ESP32 Height | 12 mm | 4 – 30 |
| Relay Length | 50 mm | 20 – 100 |
| Relay Width | 26 mm | 10 – 60 |
| Relay Height | 18 mm | 4 – 40 |
| PCB Length | 40 mm | 10 – 80 |
| PCB Width | 30 mm | 10 – 60 |
| PCB Thickness | 1.6 mm | 0.5 – 5 |
| Buzzer Diameter | 12 mm | 5 – 30 |
| Buzzer Height | 9.5 mm | 3 – 20 |
| LED Diameter | 5 mm | 2 – 15 |
| LED Height | 8 mm | 2 – 20 |
| Component Clearance | 6 mm | 1 – 20 |
| Electronics Gap | 1 mm | 0 – 10 |
| Cable Diameter | 2 mm | 0.5 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu