Brackets and mounts
Battery Immersion-Cooling Enclosure with Cell Lattice
- Bounding box
- 620.0 × 558.0 × 138.0 mm
- Engine
- Precision B-rep
- Parameters
- 38
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing battery-pack CAD assembly. Preserve the existing 224 battery cells and enclosure. Do not duplicate or replace them. Add a complete removable cell-support lattice around the existing cells, consisting of: 1. A lower perforated support grid with 224 openings aligned to the existing cell positions. 2. An upper perforated retaining grid with the same 224 aligned openings, positioned around the upper portion of the cell bodies without covering the terminals. 3. Four corner posts and several slim vertical support beams connecting the upper and lower grids. 4. Small mounting tabs to secure the lattice inside the enclosure. Use the existing cell spacing and positions. Make the grids approximately 5 mm thick, with openings sized to fit the existing 32.5 mm diameter cells. Keep the support beams between cell rows wherever possible. Leave open spaces around the cells for dielectric coolant circulation. Keep the inlet, outlet, enclosure, lid, and existing cells unchanged. Use simple geometry and millimetres. Do not add copper tubes, heat pipes, busbars, or other new components yet. The final result should show the existing 224 cells held inside a rigid, removable, two-level support cage within the enclosure. Prioritise correct alignment and avoid duplicating existing parts.
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Length | 610 mm | 500 – 2000 |
| Enclosure Width | 540 mm | 500 – 2000 |
| Enclosure Height | 135 mm | 50 – 1000 |
| Wall Thickness | 3 mm | 1 – 10 |
| Bottom Thickness | 4 mm | 1 – 20 |
| Coolant Port Diameter | 20 mm | 5 – 100 |
| Bottom Port Height | 15 mm | 5 – 100 |
| Top Port Height | 120 mm | 20 – 130 |
| Mounting Tab Length | 35 mm | 10 – 100 |
| Mounting Tab Width | 12 mm | 5 – 50 |
| Mounting Tab Thickness | 4 mm | 1 – 20 |
| Mounting Tab Hole Diameter | 4 mm | 2 – 20 |
| Lid Length | 620 mm | 500 – 2000 |
| Lid Width | 550 mm | 500 – 2000 |
| Lid Thickness | 3 mm | 1 – 20 |
| Lid Lift Above Enclosure | 0 mm | 0 – 0 |
| Lid Bolt Hole Diameter | 5 mm | 2 – 20 |
| Gasket Groove Width | 4 mm | 1 – 20 |
| Gasket Groove Inset | 20 mm | 0 – 50 |
| Gasket Groove Depth | 1.5 mm | 0.5 – 3 |
| Cell Body Diameter | 32.5 mm | 10 – 100 |
| Cell Body Height | 100 mm | 10 – 200 |
| Terminal Diameter | 12 mm | 2 – 30 |
| Terminal Height | 10 mm | 1 – 30 |
| Cell Columns | 16 count | 1 – 30 |
| Cell Rows | 14 count | 1 – 30 |
| Column Pitch | 35 mm | 20 – 100 |
| Row Pitch | 35 mm | 20 – 100 |
| Lattice Grid Thickness | 5 mm | 1 – 20 |
| Lattice Grid Hole Diameter | 34 mm | 10 – 100 |
| Lattice Border Width | 10 mm | 0 – 50 |
| Lower Grid Height Above Bottom | 5 mm | 0 – 50 |
| Upper Grid Drop from Cell Top | 10 mm | 0 – 50 |
| Corner Post Size | 8 mm | 2 – 30 |
| Vertical Beam Width | 4 mm | 1 – 20 |
| Lattice Mounting Tab Length | 15 mm | 5 – 50 |
| Lattice Mounting Tab Width | 10 mm | 2 – 30 |
| Lattice Tab Hole Diameter | 3 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu