Brackets and mounts
Battery Cover Plate with Clip and Tabs
- Bounding box
- 60.0 × 62.0 × 14.5 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- September 6, 2026
Download
Free to download and use. See the terms.
The prompt
A parametric rectangular battery cover plate. Main body dimensions: 60mm length, 50mm width, and 3mm thickness. On one of the 50mm edges (bottom edge), add a centered flexible locking clip. The clip is 15mm wide (placed exactly 17.5mm from each side), extends out by 10mm in length, and rises 10mm in height with a classic hook/arc shape pointing inward. On the opposite 50mm edge (top edge), add two small retaining tabs pointing to the same side as the main clip. Each tab is 6mm wide. The two tabs are separated by a 10mm gap exactly at the center of the edge. The tabs have a height of 2mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length | 60 mm | 20 – 200 |
| Body Width | 50 mm | 20 – 200 |
| Body Thickness | 3 mm | 1 – 10 |
| Clip Width | 15 mm | 5 – 50 |
| Clip Extension | 10 mm | 2 – 30 |
| Clip Height | 10 mm | 2 – 30 |
| Tab Width | 6 mm | 2 – 20 |
| Tab Gap | 10 mm | 2 – 30 |
| Tab Height | 2 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent