Brackets and mounts
Battery Barrier Stack with Pressure Sensor and M3 Clamp Bolts
- Bounding box
- 149.0 × 90.0 × 34.5 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- October 12, 2026
Download
Free to download and use. See the terms.
The prompt
Add the four clamp bolts Modify the existing assembly by adding four M3 × 30 mm bolts at X = -55, +55 mm and Y = -35, +35 mm. Align the bolts vertically through the matching clearance holes in the base plate and top clamp plate. Add hexagonal nut recesses measuring 5.5 mm across flats and 2.4 mm deep on the underside of the base plate. Keep the battery cells and barrier stack centered. Preserve all existing dimensions and separate components.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Plate Length | 130 mm | 80 – 250 |
| Base Plate Width | 90 mm | 60 – 200 |
| Base Plate Thickness | 6 mm | 3 – 20 |
| Clearance Hole Diameter | 3.4 mm | 2.5 – 6 |
| Hole / Bolt X Offset | 55 mm | 20 – 60 |
| Hole / Bolt Y Offset | 35 mm | 15 – 40 |
| Cell Length (X) | 90 mm | 40 – 180 |
| Cell Width (Y) | 50 mm | 30 – 120 |
| Cell Thickness | 8 mm | 3 – 30 |
| Cell Corner Radius | 3 mm | 0 – 8 |
| Barrier Length (X) | 100 mm | 40 – 200 |
| Barrier Width (Y) | 60 mm | 30 – 140 |
| Mica Layer Thickness | 0.3 mm | 0.1 – 3 |
| Aerogel Layer Thickness | 1.8 mm | 0.2 – 8 |
| Sensor Layer Thickness | 0.3 mm | 0.1 – 2 |
| Sensor Film Length | 90 mm | 40 – 160 |
| Sensor Film Width | 50 mm | 20 – 100 |
| Sensing Pad Diameter | 18 mm | 4 – 30 |
| Sensing Pad Height | 0.3 mm | 0.05 – 1 |
| Pad X Spacing | 30 mm | 5 – 60 |
| Pad Y Spacing | 12.5 mm | 5 – 40 |
| Connector Tail Length | 40 mm | 5 – 100 |
| Connector Tail Width | 10 mm | 2 – 40 |
| Connector Tail Thickness | 0.3 mm | 0.05 – 2 |
| Clamp Plate Length | 130 mm | 80 – 250 |
| Clamp Plate Width | 90 mm | 60 – 200 |
| Clamp Plate Thickness | 6 mm | 3 – 20 |
| Bolt Shank Diameter (M3) | 3 mm | 1.5 – 8 |
| Bolt Hex Head Across Flats | 5.5 mm | 2.5 – 14 |
| Bolt Hex Head Height | 2 mm | 1 – 8 |
| Bolt Shank Length | 30 mm | 10 – 80 |
| Nut Recess Across Flats | 5.5 mm | 2.5 – 14 |
| Nut Recess Depth | 2.4 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu