BATTERY_ARRAY_16S14P

Create a 3D CAD model of a battery array containing 224 cylindrical LFP 32700 battery cells for an electric vehicle battery pack. Use a simple, clean engineering design. Do not perform advanced calculations or add unnecessary details. ### 1. Battery cell Use the cylindrical battery cell shape from the previous model. Dimensions of each cell: - Diameter: 32.5 mm - Height: 70.5 mm - Shape: Straight cylindrical body with a flat bottom, a slightly rounded top edge, a flat top cap, and a small raised positive terminal. - All dimensions are in millimetres. If the previous cell model cannot be reused, create a new cell using these dimensions. ### 2. Cell arrangement Create a rectangular array of 224 identical cells. - 14 cells in each row. - 16 rows. - 36 mm distance between the centres of neighbouring cells. - All cells must stand vertically. - All positive terminals must face upwards. - All cells must have the same orientation. The array should contain exactly 224 cells. ### 3. Positioning Arrange the cells in a neat rectangular grid. Use a 36 mm centre-to-centre distance in both horizontal directions. Keep the array symmetrical and evenly spaced. Do not overlap the cells. The approximate overall dimensions of the cylindrical cell array should be: - Width: 500.5 mm. - Length: 572.5 mm. - Height: 70.5 mm, excluding any terminal that extends above the body. ### 4. CAD construction Use a rectangular pattern or repeated instances of one battery cell wherever possible. Do not manually create 224 differently modelled cells. Keep the cells as separate solid components if the software supports assemblies. Name the model BATTERY_ARRAY_16S14P. ### 5. Appearance Use a light metallic grey colour for the cell bodies and silver for the top terminals. Do not add wires, busbars, holders, coolant, or an enclosure yet. ### 6. Final output Create a complete 3D model of the 224-cell array. Show: - An isometric view. - A top view showing all 14 columns and 16 rows. - A front view. - A side view. Prioritise the correct number of cells, spacing, dimensions, and orientation over visual decoration.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.