Brackets and mounts
Base Plate with Guides and Stops
- Bounding box
- 243.5 × 100.0 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Mechanical CAD Part Units: millimeters Create one watertight solid body. ========================= BASE PLATE ========================= Sketch a rectangle. 160 x 100 mm. Extrude 3 mm. ========================= CENTER OPENING ========================= Sketch one centered rectangle. 133.5 x 74.4 mm. Cut through all. ========================= MOUNTING HOLES ========================= Create four through holes. Diameter 5 mm. Hole centers 10 mm from every outer edge. ========================= LEFT GUIDE ========================= On the top face: Sketch one rectangle. 55 x 3.5 mm. The long side of the sketch is parallel to the long edge of the base plate. The rectangle touches the left side of the cutout. The rectangle is centered between the front and rear edges of the cutout. Extrude upward 12 mm. Join to the base plate. ========================= RIGHT GUIDE ========================= Mirror the previous sketch across the center of the base plate. Extrude upward 12 mm. Join to the base plate. ========================= LEFT REAR STOP ========================= Sketch one square. 8 x 8 mm. Place it in the rear left inside corner of the cutout. Extrude upward 6 mm. Join. ========================= RIGHT REAR STOP ========================= Mirror the previous stop. Join. ========================= FINAL ========================= One solid body. No floating bodies. Generate editable parameters.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 160 mm | 50 – 500 |
| Base Width | 100 mm | 20 – 500 |
| Base Thickness | 3 mm | 1 – 20 |
| Cutout Length | 133.5 mm | 10 – 450 |
| Cutout Width | 74.4 mm | 10 – 450 |
| Hole Diameter | 5 mm | 1 – 20 |
| Hole Edge Margin | 10 mm | 2 – 50 |
| Guide Length | 55 mm | 2 – 200 |
| Guide Width | 3.5 mm | 1 – 20 |
| Guide Height | 12 mm | 1 – 50 |
| Stop Size | 8 mm | 2 – 50 |
| Stop Height | 6 mm | 1 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu