Brackets and mounts
Base Plate with Guide Rails and Stops
- Bounding box
- 160.0 × 100.0 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Mechanical CAD Part Units: millimeters Create one watertight solid body. ======================================== BASE PLATE ======================================== Rectangular plate Length: 160 Width: 100 Thickness: 3 ======================================== CENTER CUTOUT ======================================== One centered rectangular through cutout. Length: 133.5 Width: 74.4 ======================================== MOUNTING HOLES ======================================== Four through holes. Diameter: 5 Hole centers: 10 mm from every outer edge. ======================================== FEATURE 1 LEFT GUIDE RAIL ======================================== One rectangular prism. Length: 55 Width: 3.5 Height: 12 Extrude upward from the top face. Orientation: 55 mm parallel to plate length. 3.5 mm parallel to plate width. Position: Touch the left side of the rectangular cutout. Centered along the cutout length. Fuse completely with the base plate. ======================================== FEATURE 2 RIGHT GUIDE RAIL ======================================== Copy Feature 1. Mirror across the longitudinal centerline of the plate. Touch the right side of the rectangular cutout. Fuse completely with the base plate. ======================================== FEATURE 3 LEFT REAR STOP ======================================== One rectangular prism. Length: 8 Width: 8 Height: 6 Extrude upward. Place at the rear left corner of the rectangular cutout. Touch both cutout edges. Fuse completely. ======================================== FEATURE 4 RIGHT REAR STOP ======================================== Mirror Feature 3. ======================================== FINAL RESULT ======================================== One solid parametric mechanical part. No floating bodies. No separate parts. No fillets. No chamfers. Generate editable parameters.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate length | 160 mm | 100 – 300 |
| Plate width | 100 mm | 50 – 200 |
| Plate thickness | 3 mm | 1 – 10 |
| Cutout length | 133.5 mm | 50 – 158 |
| Cutout width | 74.4 mm | 30 – 98 |
| Mounting hole diameter | 5 mm | 1 – 10 |
| Hole offset from edges | 10 mm | 5 – 50 |
| Guide rail length | 55 mm | 10 – 100 |
| Guide rail width | 3.5 mm | 1 – 10 |
| Guide rail height | 12 mm | 2 – 25 |
| Stop length | 8 mm | 2 – 20 |
| Stop width | 8 mm | 2 – 20 |
| Stop height | 6 mm | 2 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu