Base Plate + 2 Magnet Modules (3-Part, Exploded)

Create 3 separate, functional CAD bodies: 1 base and 2 modules. Follow every specification exactly. Do not invent, remove, or change anything. BASE: Overall: 215 × 115 × 10 mm. Interior area: 204 × 104 mm. Perimeter wall: 5 mm thick, 8 mm high above the base → 18 mm total height. Round all corners and edges. BASE MAGNET GRID: Exactly 16 unique magnet positions. Magnets: Ø8 × 3 mm. Magnet pockets: Ø8.2 × 3.2 mm. Arrangement based on four 50 × 100 mm reference rectangles, with 4 magnet positions at the corners of each. Reference rectangles are conceptual only and must NOT be modeled or shown. Do not merge, duplicate, or remove magnet positions. Magnets sit 1 mm below the top surface of the base. Positions must be exact and symmetric. MODULE 1: 100 × 100 × 100 mm. Hollow, open top. Bottom: 10 mm thick. Walls: 8 mm thick. 4 × Ø8 × 3 mm magnets at the bottom corners. Magnet pockets: Ø8.2 × 3.2 mm. 1 mm PLA below each magnet. Magnet positions exactly match the base grid. Round all inner and outer corners/edges. MODULE 2: 100 × 100 × 80 mm. Hollow, open top. Bottom: 10 mm thick. Outer walls: 8 mm thick. Central divider: 8 mm thick → 2 equal chambers. 4 × Ø8 × 3 mm magnets at the bottom corners. Magnet pockets: Ø8.2 × 3.2 mm. 1 mm PLA below each magnet. Magnet positions exactly match the base grid. Round all inner and outer corners/edges. LAYOUT: Base and both modules are separate CAD bodies. Place all 3 bodies next to each other. They must not touch or overlap. Do not place modules on the base. Create precise, editable CAD geometry suitable for 3D printing, not a render.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.