Everything else
Barra 50x50x1000 mm bajo traccion axial 10 kN
- Bounding box
- 49.9 × 49.9 × 1010.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- October 5, 2026
Download
Free to download and use. See the terms.
The prompt
Modela una barra metálica de 1.00 m de longitud y sección cuadrada de 5 cm × 5 cm. Aplica una carga axial de tensión de 10 kN y haz la deformación observada por la carga axial de tensión de 10 kN
Parameters
| Name | Value | Range |
|---|---|---|
| Longitud inicial (sin carga) | 1000 mm | 100 – 5000 |
| Lado de la seccion cuadrada | 50 mm | 5 – 300 |
| Chaflan de aristas longitudinales | 2 mm | 0 – 10 |
| Carga axial de traccion | 10000 N | 0 – 500000 |
| Modulo de Young E | 200000 MPa | 1000 – 400000 |
| Coeficiente de Poisson | 0.3 adim | 0 – 0.5 |
| Exageracion de la deformacion | 500 x | 1 – 5000 |
| Ancho de la marca de longitud inicial | 3 mm | 0 – 20 |
| Profundidad de la marca | 1 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm