3D preview of Backgammon Checker UV Tray (Split-Tab Separators)
Loading the interactive model…
Interactive 3D model of Backgammon Checker UV Tray (Split-Tab Separators)

Everything else

Backgammon Checker UV Tray (Split-Tab Separators)

1 views
Bounding box
403.0 × 46.0 × 22.0 mm
Engine
Precision B-rep
Parameters
14
Published
September 27, 2026

Download

Free to download and use. See the terms.

The prompt

Modify the checker sections so each separator is split into two short tabs instead of one full divider. Each tab should extend inward only about 3 to 5 mm from each side wall, leaving the center open. This creates an open channel in the middle of each slot for better UV exposure while still keeping the checkers separated.

Parameters

NameValueRange
Checker Diameter38 mm10 – 60
Checker Thickness8.5 mm2 – 20
Slot Width (per checker)9.5 mm4 – 20
Slot Depth (channel)40 mm20 – 70
Checker Slots per Side15 count1 – 20
Separator Thickness2 mm1 – 6
Separator Height15 mm5 – 40
Separator Tab Length (inward)4 mm1 – 15
Dice Compartment Length50 mm20 – 90
Dice Compartment Width40 mm20 – 60
Outer Wall Thickness3 mm1.5 – 8
Bottom Thickness3 mm1 – 10
Tray Height22 mm10 – 50
Outer Corner Fillet2 mm0 – 10

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Backgammon Checker UV Tray (Split-Tab Separators) - Free CAD Model (STEP, STL) | TextoCAD