Everything else
Ayarlanabilir Kasiklik (Adjustable Cutlery Organizer)
- Bounding box
- 100 × 254.1 × 51.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- October 31, 2026
Download
Free to download and use. See the terms.
The prompt
Mutfağıma ayarlanabilir kaşıklık yapmak istiyorum.5cm yükseklik, 10cm en ve 25 cm e kadar uzayabilen kaşıklık istiyorum. 25cm e kadar uzayıp kısalabilen model olsun
Parameters
| Name | Value | Range |
|---|---|---|
| Genislik / Width | 100 mm | 80 – 160 |
| Yukseklik / Height | 50 mm | 35 – 80 |
| Govde Uzunlugu / Length | 150 mm | 120 – 220 |
| Et Kalinligi / Wall | 3 mm | 2 – 4.5 |
| Taban Kalinligi / Floor | 2.5 mm | 1.6 – 4 |
| Arka Kucuk Bolme Boyu / Rear Pocket | 35 mm | 20 – 60 |
| Uzatma Boyu / Ext Length | 140 mm | 100 – 200 |
| Uzatma Yuksekligi / Ext Height | 46 mm | 30 – 75 |
| Kizak Acilma Miktari / Slide Out | 72 mm | 0 – 100 |
| Kizak Calisma Boslugu / Clearance | 0.4 mm | 0.2 – 0.8 |
| Bolme Duvari Kalinligi / Divider | 2.4 mm | 1.6 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm