Brackets and mounts
Axisflying REX 5 SE 5-inch FPV Drone Assembly
- Bounding box
- 173.2 × 173.2 × 171.0 mm
- Engine
- Precision B-rep
- Parameters
- 49
- Published
- October 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a detailed, parametric CAD assembly of the Axisflying REX 5 SE 5-inch FPV racing drone. Use the official product page as the design reference: https://www.axisflying.com/products/rex-5-se Overall motor-to-motor diagonal wheelbase: 188.91 mm. Create separate components for: - Four carbon-fiber arms - Main bottom plate, center plate and top plate - Four motor mounting interfaces - Four cylindrical brushless motors - Front FPV camera cage and camera - Flight controller and ESC stack - Rear video transmitter and antenna - Battery mounting area and strap slots - Mounting standoffs, screws and spacers Use separate, editable solid bodies and millimetres as the units. Keep the assembly symmetrical and geometrically consistent. Use realistic component proportions based on official product photographs. Do not invent unverified dimensions or hole positions. Make unknown dimensions configurable parameters and clearly identify them as estimates. Do not represent estimated geometry as verified manufacturing geometry. Prioritize a valid parametric CAD assembly. Export STEP for CAD inspection and STL for individual printable parts where supported. Keep carbon-fiber structural plates separate from 3D-printable accessories.
Parameters
| Name | Value | Range |
|---|---|---|
| Motor-to-motor diagonal | 188.91 mm | 100 – 300 |
| Motor body diameter | 28 mm | 15 – 40 |
| Motor body height | 30 mm | 15 – 50 |
| Motor shaft diameter | 5 mm | 2 – 8 |
| Motor shaft length | 6 mm | 2 – 15 |
| Arm length | 90 mm | 50 – 150 |
| Arm width | 18 mm | 10 – 30 |
| Arm thickness | 5 mm | 2 – 8 |
| Motor mount pad size | 28 mm | 16 – 40 |
| Motor mount pad thickness | 3 mm | 1 – 6 |
| Bottom plate size | 95 mm | 70 – 120 |
| Bottom plate thickness | 3 mm | 1.5 – 6 |
| Bottom stack cutout | 36 mm | 20 – 60 |
| Bottom strap slot width | 20 mm | 10 – 30 |
| Bottom strap slot height | 3 mm | 1 – 6 |
| Center plate size | 90 mm | 70 – 120 |
| Center plate thickness | 2.5 mm | 1 – 6 |
| Center stack cutout | 36 mm | 20 – 60 |
| Top plate size | 85 mm | 70 – 120 |
| Top plate thickness | 2 mm | 1 – 5 |
| Top strap slot width | 20 mm | 10 – 30 |
| Top strap slot height | 3 mm | 1 – 6 |
| Standoff hole spacing | 60 mm | 30 – 90 |
| Mounting hole diameter | 3.2 mm | 2 – 6 |
| Standoff diameter | 6.5 mm | 3 – 12 |
| Lower standoff height | 20 mm | 10 – 40 |
| Upper standoff height | 12 mm | 5 – 30 |
| Screw head diameter | 5.5 mm | 3 – 10 |
| Screw head height | 3 mm | 1 – 6 |
| FC/ESC stack size | 36 mm | 20 – 50 |
| FC/ESC stack height | 20 mm | 10 – 40 |
| Camera cage X position | 32 mm | 0 – 50 |
| Camera cage depth | 30 mm | 15 – 50 |
| Camera cage width | 30 mm | 15 – 50 |
| Camera cage height | 25 mm | 10 – 40 |
| Cage tube thickness | 3 mm | 1 – 6 |
| Camera width/height | 19 mm | 10 – 30 |
| Camera depth | 20 mm | 10 – 30 |
| Camera tilt angle | 15 deg | -45 – 45 |
| VTX board size | 30 mm | 15 – 50 |
| VTX board height | 10 mm | 5 – 20 |
| VTX X position (rear) | -30 mm | -50 – 0 |
| Antenna base size | 15 mm | 5 – 25 |
| Antenna base height | 10 mm | 3 – 20 |
| Antenna whip diameter | 3 mm | 1 – 8 |
| Antenna whip length | 80 mm | 20 – 150 |
| Battery pad length | 80 mm | 40 – 100 |
| Battery pad width | 40 mm | 20 – 80 |
| Battery pad thickness | 3 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu