Loading the interactive model…
Interactive 3D model of Axial Flux Generator AssemblyEverything else
Axial Flux Generator Assembly
7 views
- Bounding box
- 20.0 × 20.0 × 300.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- August 17, 2026
Download
Free to download and use. See the terms.
The prompt
Make A generator with single strator sandwiched between two rotor with visible field lines, emf, and 8 poles.
Parameters
| Name | Value | Range |
|---|---|---|
| Air Gap | 2 mm | 0.5 – 10 |
| Shaft Diameter | 20 mm | 5 – 50 |
| Shaft Length | 300 mm | 100 – 600 |
| Stator OD | 200 mm | 100 – 500 |
| Stator ID | 100 mm | 40 – 300 |
| Stator Thickness | 10 mm | 2 – 50 |
| Stator Coil Count | 8 count | 2 – 24 |
| Coil Radial Length | 30 mm | 5 – 50 |
| Coil Width | 15 mm | 5 – 50 |
| Coil Thickness | 4 mm | 1 – 10 |
| Rotor OD | 220 mm | 100 – 500 |
| Rotor Thickness | 15 mm | 5 – 50 |
| Rotor Bore | 20 mm | 5 – 50 |
| Magnet Count / Poles | 8 count | 2 – 24 |
| Magnet Radial Length | 30 mm | 5 – 50 |
| Magnet Tangential Width | 20 mm | 5 – 50 |
| Magnet Thickness | 8 mm | 2 – 20 |
| Magnet PCD Radius | 75 mm | 20 – 100 |
| Field Line Tube Radius | 2 mm | 0.5 – 8 |
| Field Line Major Radius | 75 mm | 20 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS