Loading the interactive model…
Interactive 3D model of AW Cut Magazine AssemblyEverything else
AW Cut Magazine Assembly
18 views
- Bounding box
- 80.0 × 47.0 × 153.0 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
I want to create an AW cut magazine that accepts 6.5 PRC and 300 WSM bullets for hunting.
Parameters
| Name | Value | Range |
|---|---|---|
| Magazine Body Length | 80 mm | 50 – 150 |
| Magazine Body Width | 28 mm | 20 – 40 |
| Magazine Body Height | 120 mm | 80 – 200 |
| Wall Thickness | 2 mm | 1 – 5 |
| Feed Lip Height | 20 mm | 10 – 30 |
| Feed Lip Protrusion | 3 mm | 1 – 6 |
| Lug Slot Width | 10 mm | 5 – 20 |
| Lug Slot Height | 15 mm | 5 – 30 |
| Lug Slot Depth | 5 mm | 2 – 10 |
| Lug Slot Z Offset from Bottom | 90 mm | 50 – 110 |
| Follower Length | 70 mm | 50 – 90 |
| Follower Width | 22 mm | 15 – 28 |
| Follower Height Rear | 10 mm | 5 – 15 |
| Follower Height Front | 7 mm | 3 – 12 |
| Spring Guide Diameter | 8 mm | 4 – 12 |
| Spring Guide Height | 5 mm | 2 – 10 |
| Spring Wire Diameter | 1.5 mm | 0.5 – 3 |
| Spring Coil Diameter | 20 mm | 12 – 30 |
| Number of Coils | 12 | 5 – 20 |
| Compressed Length | 60 mm | 40 – 100 |
| Baseplate Length | 80 mm | 50 – 120 |
| Baseplate Width | 28 mm | 20 – 40 |
| Baseplate Thickness | 3 mm | 1 – 6 |
| Locking Lip Length | 70 mm | 50 – 80 |
| Locking Lip Width | 24 mm | 15 – 28 |
| Locking Lip Height | 2 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS