Everything else
Automotive Circular Vent Grille Bezel
- Bounding box
- 52.0 × 52.0 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- October 24, 2026
Download
Free to download and use. See the terms.
The prompt
Crea un modelo CAD paramétrico de una rejilla circular de ventilación para automóvil, imprimible en 3D. Medidas: - Diámetro exterior del borde frontal: 52 mm. - Diámetro exterior del cuerpo trasero: 41 mm. - Profundidad total: 15 mm. Crear un marco circular con borde frontal y cuerpo cilíndrico hueco. Dejar el interior abierto. Añadir dos trabas de sujeción opuestas en la parte trasera, como en una rejilla automotriz. Mantener todas las partes conectadas. Usar milímetros y permitir editar los diámetros, la profundidad y el grosor de las paredes. Mostrar vistas frontal, lateral e inferior.
Parameters
| Name | Value | Range |
|---|---|---|
| Front Rim Outer Diameter | 52 mm | 25 – 150 |
| Rear Body Outer Diameter | 41 mm | 15 – 140 |
| Total Depth | 15 mm | 5 – 60 |
| Wall Thickness | 2 mm | 0.6 – 8 |
| Front Rim Height | 4 mm | 0.5 – 25 |
| Tab Radial Protrusion | 3 mm | 0.5 – 12 |
| Tab Axial Length | 6 mm | 1 – 20 |
| Tab Width | 8 mm | 1 – 30 |
| Hook Radial Depth | 1.5 mm | 0.3 – 6 |
| Hook Axial Height | 1.5 mm | 0.3 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm