Brackets and mounts
Automatic Watering Timer IP54 Enclosure
- Bounding box
- 140.0 × 90.0 × 57.0 mm
- Engine
- Precision B-rep
- Parameters
- 39
- Published
- October 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create a detailed 3D printable enclosure for automatic watering system (irrigation timer). Main base module is 110x77x35mm. Inside: SSD1306 0.96" OLED display, 4 relay modules, ESP32 30-pin expansion board, 220V power socket. Full case dimensions: 140mm length x 90mm width x 55mm height. IP54 protection, ventilation holes, mounting holes in corners. Two 4mm holes on the side for sensors, one cable entry for 220V. Place OLED on top, relays on sides, ESP32 and socket on back. Make it watertight, with text "AUTO POLIV", clean edges, ready for 3D printing. All dimensions in mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 140 mm | 100 – 220 |
| Base Width | 90 mm | 60 – 160 |
| Base Height | 35 mm | 20 – 70 |
| Wall Thickness | 2.5 mm | 1.5 – 5 |
| Corner Boss Dia | 10 mm | 5 – 20 |
| Boss Screw Hole Dia | 4.5 mm | 2 – 8 |
| Boss Offset From Edge | 9 mm | 5 – 25 |
| Floor Vent Slot Length | 20 mm | 5 – 40 |
| Floor Vent Slot Width | 3 mm | 1 – 10 |
| Sensor Pass Hole Dia | 4 mm | 2 – 10 |
| 220V Cable Entry Dia | 16 mm | 6 – 30 |
| Sealing Tongue Width | 3 mm | 1 – 6 |
| Sealing Tongue Height | 2 mm | 1 – 4 |
| Lid Height | 22 mm | 8 – 40 |
| Lid Top Thickness | 3 mm | 1.5 – 6 |
| Counterbore Dia | 8 mm | 5 – 14 |
| OLED Window Width | 30 mm | 10 – 60 |
| OLED Window Depth | 15 mm | 5 – 40 |
| OLED Recess Depth | 1.5 mm | 0.5 – 3 |
| Divider Offset From Left Wall | 45 mm | 10 – 100 |
| Divider Height | 32 mm | 10 – 34 |
| Divider Thickness | 2.5 mm | 1.5 – 6 |
| Cable Slot Width | 12 mm | 4 – 30 |
| Socket Plate Width | 60 mm | 30 – 90 |
| Socket Plate Height | 32 mm | 15 – 34 |
| Socket Plate Thickness | 3 mm | 1.5 – 6 |
| Socket Cutout Width | 42 mm | 10 – 70 |
| Socket Cutout Height | 20 mm | 5 – 28 |
| ESP32 Tray Length | 65 mm | 30 – 100 |
| ESP32 Tray Width | 32 mm | 15 – 70 |
| Tray Plate Thickness | 3 mm | 1.5 – 8 |
| Standoff Dia | 5 mm | 2 – 12 |
| Standoff Height | 3 mm | 1 – 15 |
| M2.5 Pilot Hole Dia | 2.5 mm | 1 – 6 |
| Relay Bar Length | 80 mm | 30 – 120 |
| Relay Bar Width | 8 mm | 4 – 20 |
| Relay Bar Height | 4 mm | 2 – 12 |
| Left Bar Centre X | 56 mm | 10 – 100 |
| Right Bar Centre X | 133 mm | 50 – 138 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu