Gears and transmission
Automatic Pill Dispenser - Exploded Part Set
- Bounding box
- 2855.0 × 170.0 × 145.0 mm
- Engine
- Precision B-rep
- Parameters
- 48
- Published
- September 30, 2026
Download
Free to download and use. See the terms.
The prompt
Design a compact automatic pill dispenser in SolidWorks. Create a freestanding circular dispenser with a rotating carousel containing 14 separate pill compartments. The carousel should rotate around a central shaft and align one compartment at a time with a dispensing opening at the bottom. Include: 14 isolated medication compartments Central rotating shaft with bearings Small motor and gear reduction system Indexing/locking mechanism so the carousel stops precisely at each compartment Sliding dispensing gate Chute leading to a removable collection cup Transparent circular front cover with hinge Outer protective housing and stable base Simple LCD display and START button Manual/emergency override Make the design modern, compact, realistic, and manufacturable, using plastic for the housing, transparent plastic for the cover, and metal for the shaft and gears. Create a complete assembly, exploded view, section view, and motion study showing the carousel rotating, locking into position, opening the dispensing gate, and dropping pills into the collection cup.
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded Layout Gap | 250 mm | 150 – 600 |
| Housing Diameter | 150 mm | 80 – 250 |
| Housing Height | 130 mm | 60 – 250 |
| Housing Wall | 3 mm | 1.5 – 8 |
| Base Diameter | 170 mm | 90 – 280 |
| Base Thickness | 12 mm | 4 – 30 |
| Shaft Diameter | 8 mm | 4 – 20 |
| Shaft Length | 140 mm | 60 – 260 |
| Keyway Width | 2 mm | 1 – 6 |
| Keyway Depth | 1 mm | 0.5 – 3 |
| Bearing OD | 22 mm | 10 – 50 |
| Bearing ID | 8 mm | 3 – 30 |
| Bearing Thickness | 7 mm | 3 – 20 |
| Carousel Diameter | 125 mm | 60 – 200 |
| Carousel Thickness | 25 mm | 10 – 60 |
| Compartment Count | 14 pcs | 4 – 24 |
| Compartment Length (tangential) | 22 mm | 8 – 40 |
| Compartment Width (radial) | 18 mm | 6 – 36 |
| Compartment Depth | 18 mm | 5 – 40 |
| Compartment Pitch Radius | 49 mm | 15 – 90 |
| Gearmotor Width (X) | 40 mm | 15 – 80 |
| Gearmotor Depth (Y) | 30 mm | 15 – 80 |
| Gearmotor Height (Z) | 30 mm | 10 – 80 |
| Output Gear Diameter | 30 mm | 10 – 70 |
| Output Gear Thickness | 10 mm | 3 – 30 |
| Indexer Pawl Length | 25 mm | 8 – 50 |
| Indexer Pawl Width | 15 mm | 5 – 40 |
| Indexer Pawl Height | 10 mm | 3 – 30 |
| Gate Length | 35 mm | 15 – 70 |
| Gate Width | 25 mm | 10 – 60 |
| Gate Thickness | 4 mm | 1.5 – 12 |
| Gate Opening Diameter | 18 mm | 6 – 30 |
| Chute Top Diameter | 40 mm | 15 – 80 |
| Chute Bottom Diameter | 25 mm | 10 – 60 |
| Chute Height | 30 mm | 10 – 80 |
| Chute Wall | 3 mm | 1 – 5 |
| Collection Cup Diameter | 55 mm | 20 – 100 |
| Collection Cup Height | 45 mm | 15 – 100 |
| Collection Cup Wall | 2 mm | 1 – 5 |
| Cover Diameter | 155 mm | 80 – 260 |
| Cover Thickness | 3 mm | 1 – 10 |
| Hinge Pin Diameter | 6 mm | 2 – 15 |
| LCD Width | 35 mm | 10 – 70 |
| LCD Height | 20 mm | 8 – 50 |
| LCD Thickness | 5 mm | 2 – 20 |
| START Button Diameter | 12 mm | 5 – 25 |
| Override Knob Diameter | 10 mm | 4 – 25 |
| Override Knob Length | 20 mm | 5 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled