Loading the interactive model…
Interactive 3D model of Auto Block DispenserEverything else
Auto Block Dispenser
31 views
- Bounding box
- 100.0 × 80.0 × 100.0 mm
- Engine
- Precision B-rep
- Parameters
- 43
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
生成一个自动投放小型固体的盒型装置，可以投放10*10*8mm大小的洗涤块，装置外观透明，可以看到里面的运行机构
Parameters
| Name | Value | Range |
|---|---|---|
| Block Width | 10 mm | 5 – 20 |
| Block Depth | 10 mm | 5 – 20 |
| Block Height | 8 mm | 4 – 15 |
| Housing Width | 100 mm | 60 – 200 |
| Housing Depth | 80 mm | 50 – 150 |
| Housing Height | 100 mm | 60 – 200 |
| Housing Wall Thickness | 2 mm | 1 – 5 |
| Bin Cavity Width | 50 mm | 20 – 100 |
| Bin Cavity Depth | 50 mm | 20 – 100 |
| Bin Cavity Height | 50 mm | 20 – 100 |
| Bin Wall Thickness | 1.5 mm | 0.5 – 5 |
| Bin Floor Thickness | 2 mm | 1 – 5 |
| Wheel Diameter | 60 mm | 30 – 100 |
| Wheel Height | 9 mm | 5 – 20 |
| Wheel Bore Diameter | 5 mm | 2 – 10 |
| Slot Width | 10.5 mm | 6 – 20 |
| Slot Depth | 10.5 mm | 6 – 20 |
| Slot Radial Position | 20 mm | 5 – 40 |
| Load Angle | 0 ° | -180 – 180 |
| Wheel Center X | 50 mm | 0 – 100 |
| Wheel Center Y | 40 mm | 0 – 80 |
| Wheel Center Z | 30 mm | 10 – 80 |
| Chute Inner Width | 12 mm | 5 – 30 |
| Chute Inner Height | 12 mm | 5 – 30 |
| Chute Wall Thickness | 1 mm | 0.5 – 3 |
| Chute Exit Z | 10 mm | 0 – 50 |
| Flap Width | 15 mm | 5 – 30 |
| Flap Height | 12 mm | 5 – 30 |
| Flap Thickness | 2 mm | 0.5 – 5 |
| Flap Open Angle | 15 ° | 0 – 90 |
| Motor Width (X) | 30 mm | 10 – 50 |
| Motor Depth (Y) | 20 mm | 10 – 50 |
| Motor Height (Z) | 20 mm | 10 – 50 |
| Shaft Diameter | 5 mm | 2 – 10 |
| Shaft Length Inside | 20 mm | 5 – 40 |
| Board Thickness | 5 mm | 1 – 10 |
| Board Width (Y) | 40 mm | 10 – 60 |
| Board Depth (Z) | 30 mm | 10 – 60 |
| Board Position Y | 10 mm | 0 – 80 |
| Board Position Z | 20 mm | 0 – 80 |
| Button Diameter | 8 mm | 2 – 15 |
| Button Height | 6 mm | 1 – 12 |
| Top Cover Open Angle | 15 ° | 0 – 90 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS