Loading the interactive model…
Interactive 3D model of Assembled Flatbed Knitting MachineEverything else
Assembled Flatbed Knitting Machine
5 views
- Bounding box
- 600.0 × 120.0 × 433.0 mm
- Engine
- Precision B-rep
- Parameters
- 38
- Published
- August 18, 2026
Download
Free to download and use. See the terms.
The prompt
Design me a simplple mechanical flatbed knitting machine
Parameters
| Name | Value | Range |
|---|---|---|
| Main bed length | 600 mm | 300 – 1200 |
| Main bed width | 120 mm | 60 – 300 |
| Main bed thickness | 20 mm | 5 – 60 |
| Rail Y position | 50 mm | 20 – 80 |
| Rail width | 10 mm | 4 – 30 |
| Rail height | 10 mm | 4 – 25 |
| Needle bed length | 550 mm | 200 – 1000 |
| Needle bed width | 80 mm | 30 – 150 |
| Needle bed thickness | 15 mm | 5 – 40 |
| Needle bed tilt | 3 deg | 0 – 15 |
| Groove depth | 2.5 mm | 0.5 – 8 |
| Groove width | 1.5 mm | 0.8 – 4 |
| Needle count | 100 | 10 – 200 |
| Needle length | 90 mm | 20 – 150 |
| Needle thickness | 1.2 mm | 0.5 – 3 |
| Needle height | 1 mm | 0.4 – 3 |
| Hook length | 4 mm | 1 – 10 |
| Hook height | 5 mm | 1 – 10 |
| Carriage length (slide dir) | 80 mm | 40 – 200 |
| Carriage width (across bed) | 120 mm | 60 – 200 |
| Carriage height | 50 mm | 20 – 100 |
| Yarn carrier length | 60 mm | 20 – 120 |
| Yarn carrier width | 30 mm | 10 – 80 |
| Yarn carrier height | 20 mm | 5 – 50 |
| Yarn carrier overlap | 5 mm | 0 – 20 |
| Thread tube OD | 8 mm | 3 – 20 |
| Thread tube ID | 4 mm | 0.5 – 10 |
| Thread tube height | 25 mm | 5 – 60 |
| Tension post diameter | 10 mm | 4 – 30 |
| Tension post height | 150 mm | 50 – 300 |
| Tension post X position | 280 mm | 0 – 500 |
| Tension post Y position | 0 mm | -60 – 60 |
| Tension disc diameter | 40 mm | 10 – 80 |
| Tension disc thickness | 4 mm | 1 – 10 |
| Frame leg height | 180 mm | 50 – 300 |
| Frame leg thickness | 40 mm | 10 – 80 |
| Leg X offset from center | 260 mm | 100 – 400 |
| Rubber foot height | 8 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS