Brackets and mounts
Assembled Benchtop Pneumatic Press Layout
- Bounding box
- 400.0 × 355.0 × 400.0 mm
- Engine
- Precision B-rep
- Parameters
- 38
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Refine this same model into an assembled machine layout, not an exploded or separated parts layout. Keep the 300 x 250 mm base plate, mount both 40 x 40 uprights vertically at the rear left and rear right edges of the base, and mount the 300 x 40 x 40 top crossmember across them. Put the 180 x 120 fixture plate centered on the base below the press. Place the two locating nests side by side on that fixture plate. Mount the placeholder pneumatic cylinder vertically on the top crossmember, centered above the nests; align the guided ram and flat press tool vertically over the workpiece location. Attach the camera/sensor bracket to the frame aimed at the fixture. Put the safety guard around the working area. Keep all components in their actual assembled positions and make them visible together. Keep all cylinder sizing and force as TBD; concept only, not for fabrication or operation.
Parameters
| Name | Value | Range |
|---|---|---|
| Nest Side-by-side Gap | 20 mm | 0 – 100 |
| Base Length | 300 mm | 200 – 600 |
| Base Width | 250 mm | 150 – 500 |
| Base Thickness | 10 mm | 5 – 30 |
| Upright Section X | 40 mm | 20 – 80 |
| Upright Section Y | 40 mm | 20 – 80 |
| Upright Height | 300 mm | 200 – 500 |
| Top Crossmember Length | 300 mm | 200 – 600 |
| Crossmember Section Y | 40 mm | 20 – 80 |
| Crossmember Section Z | 40 mm | 20 – 80 |
| Fixture Length | 180 mm | 100 – 300 |
| Fixture Width | 120 mm | 80 – 250 |
| Fixture Thickness | 10 mm | 5 – 30 |
| Nest Length | 60 mm | 30 – 150 |
| Nest Width | 40 mm | 20 – 100 |
| Nest Height | 20 mm | 10 – 80 |
| Cylinder Width X | 50 mm | 20 – 100 |
| Cylinder Width Y | 50 mm | 20 – 100 |
| Cylinder Height | 100 mm | 50 – 200 |
| Ram Width X | 30 mm | 10 – 100 |
| Ram Width Y | 30 mm | 10 – 100 |
| Ram Height | 60 mm | 20 – 150 |
| Tool Width X | 70 mm | 30 – 160 |
| Tool Width Y | 70 mm | 30 – 160 |
| Tool Height | 10 mm | 5 – 40 |
| Bracket Length | 40 mm | 20 – 100 |
| Bracket Width | 10 mm | 5 – 40 |
| Bracket Height | 30 mm | 10 – 80 |
| Bracket Spacing | 30 mm | 10 – 100 |
| Clip Size | 12 mm | 5 – 40 |
| Guard Length | 400 mm | 250 – 700 |
| Guard Width | 350 mm | 200 – 600 |
| Guard Height | 400 mm | 200 – 700 |
| Guard Door Width | 160 mm | 60 – 300 |
| Guard Door Height | 250 mm | 100 – 500 |
| Guard Door Thickness | 5 mm | 2 – 20 |
| E-Stop Button Diameter | 30 mm | 10 – 60 |
| E-Stop Button Protrusion | 20 mm | 5 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu