Everything else
Artificial-Heart Continuous-Flow Pump
- Bounding box
- 60.5 × 56.0 × 58.3 mm
- Engine
- Precision B-rep
- Parameters
- 55
- Published
- September 28, 2026
Download
Free to download and use. See the terms.
The prompt
Great but change this so that it would fit into an artificial heart
Parameters
| Name | Value | Range |
|---|---|---|
| Housing OD | 42 mm | 30 – 80 |
| Housing Thickness | 12 mm | 6 – 30 |
| Volute Mean Radius | 16 mm | 10 – 35 |
| Volute Groove Width | 5.5 mm | 2 – 15 |
| Volute Groove Depth | 4.5 mm | 1 – 12 |
| Inlet Bore (housing) | 8 mm | 3 – 20 |
| Outlet Bore (housing) | 8 mm | 3 – 20 |
| Inlet Nozzle ID | 8 mm | 3 – 20 |
| Inlet Nozzle OD | 13 mm | 5 – 30 |
| Inlet Nozzle Length | 6 mm | 2 – 25 |
| Outlet Nozzle ID | 8 mm | 3 – 20 |
| Outlet Nozzle OD | 13 mm | 5 – 30 |
| Outlet Nozzle Length | 10 mm | 4 – 30 |
| Inflow Cannula ID | 8 mm | 3 – 20 |
| Inflow Cannula OD | 12 mm | 6 – 25 |
| Inflow Cannula Length | 26 mm | 5 – 60 |
| Inflow Suture Cuff OD | 18 mm | 10 – 35 |
| Inflow Suture Cuff Thickness | 2.5 mm | 1 – 8 |
| Outflow Graft Cuff OD | 18 mm | 10 – 35 |
| Outflow Graft Cuff Thickness | 2.5 mm | 1 – 8 |
| Outflow Barb Count | 3 - | 0 – 6 |
| Outflow Barb Width | 1 mm | 0.5 – 3 |
| Outflow Barb Height | 0.6 mm | 0.2 – 2 |
| Mounting Flange OD | 56 mm | 35 – 90 |
| Mounting Flange Bore | 36 mm | 20 – 60 |
| Mounting Flange Thickness | 4 mm | 1.5 – 10 |
| Mounting Bolt Circle Dia | 48 mm | 30 – 80 |
| Mounting Hole Dia (M2.5) | 2.6 mm | 1.5 – 6 |
| Mounting Hole Count | 6 - | 3 – 12 |
| Impeller OD | 27 mm | 15 – 55 |
| Impeller Hub Dia | 9 mm | 4 – 25 |
| Blade Height | 4 mm | 1 – 15 |
| Blade Thickness | 1.2 mm | 0.5 – 6 |
| Blade Count | 6 - | 3 – 12 |
| Blade Angle | 30 deg | 0 – 75 |
| Impeller Axial Thickness | 6 mm | 2 – 20 |
| Radial Tip Clearance | 0.4 mm | 0.05 – 2 |
| Axial Clearance | 0.4 mm | 0.05 – 2 |
| Rotor Hub Dia | 8 mm | 3 – 25 |
| Rotor Hub Length | 12 mm | 3 – 40 |
| Magnet Ring OD | 22 mm | 10 – 45 |
| Magnet Ring ID | 16 mm | 6 – 40 |
| Magnet Ring Thickness | 5 mm | 1 – 20 |
| Sealed Can OD | 26 mm | 12 – 50 |
| Sealed Can ID | 23 mm | 10 – 48 |
| Sealed Can Length | 12 mm | 3 – 40 |
| Stator OD | 30 mm | 15 – 60 |
| Stator ID | 27 mm | 12 – 55 |
| Stator Length | 12 mm | 3 – 40 |
| Coil Ring OD | 34 mm | 15 – 70 |
| Coil Ring ID | 30 mm | 12 – 60 |
| Coil Ring Height | 3 mm | 1 – 15 |
| Sensor Dia | 3 mm | 1 – 10 |
| Sensor Length | 8 mm | 2 – 25 |
| Sensor Count | 3 - | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm