Everything else
Articulated Handlebar Phone Mount with Rounded Split Clamp
- Bounding box
- 70.0 × 30.0 × 175.0 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- September 22, 2026
Download
Free to download and use. See the terms.
The prompt
comienzo con los detalles desde abajo, el agarre del manubrio deben ser dos piezas a la mitad ya que de esa manera se puede colocar cuando fijo las partes con tornillos, esa pieza debe ser redondeada por cuestion estetica, mostrame como queda y seguimos avanzando
Parameters
| Name | Value | Range |
|---|---|---|
| Handlebar diameter | 25 mm | 20 – 35 |
| Clamp length (along bar) | 30 mm | 15 – 50 |
| Clamp width | 24 mm | 18 – 40 |
| Clamp total height | 30 mm | 26 – 45 |
| Split gap between halves | 1 mm | 0.2 – 3 |
| Hinge web thickness | 3 mm | 1 – 8 |
| Clamp outer fillet | 4 mm | 0.5 – 6 |
| Clamp bolt hole diameter | 5 mm | 3 – 8 |
| Clamp bolt offset from center | 8 mm | 4 – 15 |
| Pivot boss diameter | 14 mm | 8 – 22 |
| Pivot boss length | 20 mm | 10 – 35 |
| Pivot hole diameter | 8 mm | 4 – 14 |
| Pivot center height | 12 mm | 5 – 25 |
| Arm width | 14 mm | 8 – 25 |
| Arm rise above plate base | 8 mm | 3 – 25 |
| Back plate width | 70 mm | 40 – 120 |
| Back plate thickness | 4 mm | 2 – 8 |
| Back plate height | 120 mm | 80 – 180 |
| Plate bottom Z | 40 mm | 20 – 80 |
| Shelf depth | 20 mm | 10 – 35 |
| Shelf thickness | 3 mm | 1.5 – 6 |
| Front lip height | 8 mm | 4 – 15 |
| Side gripper thickness | 6 mm | 3 – 12 |
| Side gripper depth | 12 mm | 6 – 25 |
| Side gripper height | 25 mm | 15 – 50 |
| Side gripper Z | 80 mm | 40 – 130 |
| Gripper screw diameter | 3 mm | 2 – 5 |
| Adjustment slot length | 10 mm | 5 – 20 |
| Adjustment slot width | 5 mm | 3 – 10 |
| Adjustment slot Z | 60 mm | 20 – 120 |
| Adjustment slot offset | 25 mm | 10 – 45 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm