Everything else
Arduino UNO R4 case (base + screwed lid)
- Bounding box
- 88.6 × 73.4 × 26.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 39
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
« Boîte en deux pièces (base + couvercle vissé) pour une Arduino UNO R4 (68.6 x 53.4 mm), parois de 2.5 mm. • Base avec 4 plots percés à 3 mm pour vis M3 aux positions des trous de fixation de la carte. • Découpes latérales pour le port USB-C, le jack d'alimentation et les rangées de connecteurs. • Trous d'aération sur le dessus. » Mesure ta carte ou joins un croquis coté pour l'espacement exact des trous. Ensuite, ajuste tout avec les curseurs (gratuit) et exporte en STL ou 3MF pour l'impression.
Parameters
| Name | Value | Range |
|---|---|---|
| Board length | 68.6 mm | 50 – 100 |
| Board width | 53.4 mm | 40 – 80 |
| Board thickness | 1.6 mm | 1 – 3 |
| Wall thickness | 2.5 mm | 1.2 – 5 |
| Total board clearance | 1 mm | 0.4 – 3 |
| Floor thickness | 2.5 mm | 1.2 – 5 |
| Base height | 24 mm | 20 – 50 |
| Standoff height | 6 mm | 3 – 10 |
| Standoff outer diameter | 6 mm | 6 – 10 |
| Board screw hole diameter | 3 mm | 2.5 – 3.6 |
| Lid ear radius | 4 mm | 3 – 8 |
| Ear overlap with wall | 1 mm | 0.5 – 3 |
| Lid screw pilot diameter | 2.8 mm | 2 – 3.6 |
| Lid screw clearance diameter | 3.4 mm | 3 – 4 |
| Lid thickness | 3 mm | 1.2 – 6 |
| Lid overlap with base | 0.5 mm | 0.2 – 1 |
| Lid lip height | 2 mm | 1 – 5 |
| Lid lip wall thickness | 2 mm | 1.2 – 5 |
| USB cutout width | 10 mm | 5 – 20 |
| USB cutout height | 5 mm | 3 – 10 |
| USB cutout Y position | 15 mm | -20 – 20 |
| Power jack cutout width | 10 mm | 5 – 20 |
| Power jack cutout height | 12 mm | 6 – 15 |
| Power jack cutout Y position | -15 mm | -20 – 20 |
| Header slot length | 55 mm | 20 – 70 |
| Header slot height | 10 mm | 4 – 12 |
| Vent hole diameter | 3 mm | 1.5 – 6 |
| Vent columns | 5 mm | 2 – 8 |
| Vent rows | 4 mm | 2 – 6 |
| Vent spacing X | 10 mm | 5 – 15 |
| Vent spacing Y | 10 mm | 5 – 15 |
| Board hole 1 X from left | 13.97 mm | 0 – 68.6 |
| Board hole 1 Y from bottom | 2.54 mm | 0 – 53.4 |
| Board hole 2 X from left | 66.04 mm | 0 – 68.6 |
| Board hole 2 Y from bottom | 7.62 mm | 0 – 53.4 |
| Board hole 3 X from left | 66.04 mm | 0 – 68.6 |
| Board hole 3 Y from bottom | 35.56 mm | 0 – 53.4 |
| Board hole 4 X from left | 15.24 mm | 0 – 68.6 |
| Board hole 4 Y from bottom | 50.8 mm | 0 – 53.4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Flip-Top Bottle Cap with Center Hole
我要生成類似瓶蓋跟市售一模一樣 可以上掀蓋然後打開中間會有一個洞
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
