Arduino Uno Enclosure with Lid and Locking Holes

1 views

Bounding box: 96.8 × 96.8 × 38.5 mm
Engine: Precision B-rep
Parameters: 25
Published: October 16, 2026

Download

Free to download and use. See the terms.

The prompt

增加一個蓋子，並在箱子上有鎖孔

Parameters

Name	Value	Range
Box Outer Size	90 mm	30 – 250
Box Height	35 mm	10 – 150
Wall Thickness	3 mm	1 – 8
Bottom Thickness	3 mm	1 – 12
Corner Radius	4 mm	0 – 20
PCB Hole Pitch X	58.42 mm	10 – 150
PCB Hole Pitch Y	35.56 mm	10 – 150
Standoff Height	7 mm	2 – 25
Standoff Diameter	6.5 mm	3 – 15
M3 Pilot Hole Dia	2.5 mm	1 – 6
USB Cut-out Width	12 mm	3 – 40
USB Cut-out Height	11 mm	3 – 40
USB Cut-out Center X	-18 mm	-100 – 100
USB Cut-out Center Z	14 mm	2 – 140
Power Cut-out Width	9 mm	3 – 40
Power Cut-out Height	12 mm	3 – 40
Power Cut-out Center X	18 mm	-100 – 100
Power Cut-out Center Z	14 mm	2 – 140
Lid Plate Thickness	3.5 mm	1.5 – 12
Lid Skirt Height	14 mm	3 – 60
Lid Skirt Thickness	3 mm	1 – 8
Lid Fit Clearance	0.4 mm	0 – 2
Locking Hole Dia (M3)	3.2 mm	1 – 10
Locking Hole Offset	30 mm	2 – 120
Locking Hole Below Rim	6 mm	1 – 40

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS