Brackets and mounts
Arduino Micro Servo Breadboard Base Plate
- Bounding box
- 180.0 × 140.0 × 4.0 mm
- Engine
- Precision B-rep
- Parameters
- 25
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Design a rectangular electronics base plate measuring approximately 180 mm × 140 mm with mounting holes for an Arduino UNO R4 Minima, an MG90S micro servo, a half-size breadboard, and integrated cable routing channels. Include four rubber-foot mounting holes at the corners.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length | 180 mm | 100 – 300 |
| Plate Width | 140 mm | 100 – 300 |
| Plate Thickness | 4 mm | 2 – 10 |
| Rubber Foot Hole Dia | 4 mm | 2 – 6 |
| Rubber Foot Inset from Edge | 5 mm | 3 – 10 |
| Arduino Center X (from plate center) | 30 mm | -70 – 70 |
| Arduino Center Y (from plate center) | -20 mm | -60 – 60 |
| Arduino Hole Spacing X | 68.6 mm | 40 – 90 |
| Arduino Hole Spacing Y | 53.4 mm | 30 – 70 |
| Arduino Hole Diameter | 3.2 mm | 2 – 5 |
| Breadboard Center X | -30 mm | -70 – 70 |
| Breadboard Center Y | 20 mm | -60 – 60 |
| Breadboard Length | 80 mm | 50 – 120 |
| Breadboard Width | 55 mm | 30 – 80 |
| Breadboard Hole Diameter | 3 mm | 2 – 5 |
| Breadboard Hole Inset from Edge | 5 mm | 3 – 10 |
| Servo Center X | -30 mm | -70 – 70 |
| Servo Center Y | -30 mm | -60 – 60 |
| Servo Hole Spacing | 10 mm | 5 – 20 |
| Servo Hole Diameter | 2 mm | 1.5 – 4 |
| Cable Channel Center X | 0 mm | -50 – 50 |
| Cable Channel Center Y | 40 mm | -60 – 60 |
| Cable Channel Length | 100 mm | 20 – 170 |
| Cable Channel Width | 5 mm | 2 – 10 |
| Cable Channel Depth | 2 mm | 1 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent