Arduino Enclosure with Separable Lid

1 views

Bounding box: 75.8 × 75.8 × 33.0 mm
Engine: Precision B-rep
Parameters: 26
Published: October 16, 2026

Download

Free to download and use. See the terms.

The prompt

盒子和箱子可以是兩個單獨拖拉的嗎

Parameters

Name	Value	Range
Body Outer Size	70 mm	30 – 200
Body Height	30 mm	10 – 120
Wall Thickness	2.5 mm	1 – 6
Floor Thickness	3 mm	1 – 10
Corner Radius	4 mm	0 – 20
Mounting Hole Pitch X	60 mm	10 – 180
Mounting Hole Pitch Y	43 mm	10 – 180
Standoff Height	6 mm	2 – 20
Standoff Diameter	7 mm	3 – 15
Screw Pilot Hole Dia	2.8 mm	1 – 6
USB Cut-out Width	13 mm	2 – 40
USB Cut-out Height	6 mm	2 – 30
USB Center X	-15 mm	-90 – 90
USB Center Z	13 mm	2 – 110
Power Cut-out Width	9 mm	2 – 40
Power Cut-out Height	11 mm	2 – 40
Power Center X	18 mm	-90 – 90
Power Center Z	13 mm	2 – 110
Lid Plate Thickness	3 mm	1.5 – 10
Lid Skirt Height	8 mm	3 – 30
Lid Skirt Thickness	2.5 mm	1 – 6
Lid Skirt Clearance	0.4 mm	0.1 – 2
Lid Explode Gap	0 mm	0 – 60
Lock Hole Dia	3.4 mm	1 – 10
Lock Hole Offset	24 mm	5 – 30
Lock Hole Below Top	4 mm	2 – 15

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS