Everything else
Archaeological Dig Miniature Diorama
- Bounding box
- 124.7 × 129.3 × 36.2 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
A detailed miniature 3D diorama square tile of an archaeological dig site. The ground is rough, sandy dirt and dry soil scattered with small rocks, patches of sparse green weeds, and desert grass. Features ancient weathered artifacts half-buried in the sand, including a carved stone block with geometric relief patterns, a sculpted stone head of a classical Roman statue, broken terracotta clay pottery jars, and ruined stone blocks. Soft, natural daylight casting gentle shadows, high texture fidelity, miniature model style.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 120 mm | 60 – 200 |
| Base Width | 120 mm | 60 – 200 |
| Base Height | 10 mm | 5 – 30 |
| Pebble Size | 3.5 mm | 1 – 8 |
| Pebble Count | 60 count | 0 – 200 |
| Grass Tuft Count | 18 count | 0 – 100 |
| Grass Height | 10 mm | 4 – 25 |
| Stone Block Length | 30 mm | 15 – 60 |
| Stone Block Width | 20 mm | 10 – 40 |
| Stone Block Height | 15 mm | 8 – 30 |
| Stone Block Tilt Angle | 20 deg | 0 – 45 |
| Stone Block Position X | -35 mm | -60 – 60 |
| Stone Block Position Y | -35 mm | -60 – 60 |
| Stone Block Burial Depth | 8 mm | 1 – 15 |
| Head Diameter | 16 mm | 10 – 30 |
| Head Total Height | 25 mm | 15 – 50 |
| Head Tilt Angle | 22 deg | 0 – 45 |
| Head Position X | 25 mm | -60 – 60 |
| Head Position Y | 20 mm | -60 – 60 |
| Head Burial Depth | 10 mm | 1 – 20 |
| Jar Outer Diameter | 30 mm | 15 – 60 |
| Jar Height | 26 mm | 12 – 50 |
| Jar Wall Thickness | 3 mm | 1.5 – 5 |
| Jar Roll/Tilt Angle | 15 deg | 0 – 60 |
| Jar Position X | 0 mm | -60 – 60 |
| Jar Position Y | -10 mm | -60 – 60 |
| Jar Burial Depth | 10 mm | 2 – 20 |
| Sherd Count | 4 count | 0 – 12 |
| Sherd Size | 7 mm | 3 – 15 |
| Rubble Nominal Size | 20 mm | 10 – 40 |
| Rubble Count | 6 count | 0 – 12 |
| Rubble Burial Depth | 10 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like