Brackets and mounts
Arbor Press C-Frame (3 tonne)
- Bounding box
- 420 × 260 × 520 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D parametric CAD model of a heavy-duty C-frame for a 3-tonne rack-and-pinion arbor press. Use these dimensions: - Base footprint: 420 × 260 mm - Column section: 140 × 100 mm - Frame I-section: 100 × 140 × 18 mm - Extrusion depth: 100 mm - Head length: 350 mm - Throat depth: 150 mm - Daylight: 300 mm Material: FG 260 grey cast iron. Include the ram guide opening, shaft mounting bores, table pad and four M12 mounting holes. Use solid geometry and parametric features. Do not invent missing dimensions. Ask me for clarification where necessary.
Parameters
| Name | Value | Range |
|---|---|---|
| Base length X | 420 mm | 300 – 600 |
| Base width Y | 260 mm | 180 – 400 |
| Base thickness | 60 mm | 30 – 120 |
| Column depth X | 140 mm | 80 – 220 |
| Column width Y | 100 mm | 60 – 180 |
| Head length X | 350 mm | 220 – 600 |
| Head I-section height Z | 140 mm | 80 – 240 |
| Head I-section width Y | 100 mm | 60 – 180 |
| I-section flange / web thickness | 18 mm | 8 – 30 |
| Throat depth | 150 mm | 80 – 300 |
| Daylight | 300 mm | 150 – 500 |
| Table pad diameter | 120 mm | 60 – 220 |
| Table pad height | 20 mm | 5 – 60 |
| Ram diameter | 30 mm | 15 – 60 |
| Pinion shaft diameter | 28 mm | 12 – 50 |
| Mounting hole dia - M12 clearance | 14 mm | 6 – 20 |
| Mounting hole inset from base edge | 30 mm | 15 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Hydraulic Wing and Flaperon Demonstrator
Create a parametric 3D CAD model of a hydraulic aircraft wing and movable flaperon based on the reference sketch. **Wing dimensions:** - 240 mm chord, 120 mm span, 48 mm thickness
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
