Brackets and mounts
Aquarium Probe Manifold
- Bounding box
- 162.5 × 70.0 × 97.6 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- September 20, 2026
Download
Free to download and use. See the terms.
The prompt
A 3D manifold water chamber for aquarium probes, designed as a single continuous watertight solid with integrated mounting bracket, probe ports, and barb hose connectors. 1. MAIN CHAMBER BODY: - Rectangular box with outer dimensions: 150mm width (X-axis), 55mm depth (Y-axis), 75mm height (Z-axis). - Wall thickness: 2.5mm creating an internal hollow reservoir for water flow. 2. GLASS MOUNTING BRACKET (REAR): - Integrated mounting hook extending along the full width of the top rear edge. - Designed to fit a 15mm glass panel thickness, with a 35mm vertical drop on the outer back face. 3. PROBE PORT HOLDING TUBES (TOP FACE): - 5 individual cylindrical probe sockets positioned on the top face along the X-axis with 23mm center-to-center spacing to ensure they do not touch. - Ports are tilted at a 45-degree angle pointing backwards for easy probe insertion. - Smooth outer socket walls with internal through-holes corresponding to probe diameters: * Port 1 (pH): 13.5mm inner diameter * Port 2 (ORP): 13.5mm inner diameter * Port 3 (Salinity): 14.0mm inner diameter * Port 4 (Temperature): 11.0mm inner diameter * Port 5 (Ground): 13.0mm inner diameter - Embossed 3D text labels on the top surface in front of each port: "PH", "ORP", "SAL", "TMP", "GND". 4. HYDRAULIC CONNECTIONS (BARB FITTINGS FOR 12/16MM HOSE): - Hose barb fittings with 12.5mm outer diameter and 8.5mm inner water passage. - Inlet: 90-degree elbow barb on lower-left side pointing UP. - Outlet: 90-degree elbow barb on upper-right side pointing DOWN. - Emergency overflow: Reversed U-turn barb fitting on top rear-right corner pointing DOWN alongside the box (offset from the GND probe port). - All fittings are solid-walled, smoothly merged into the main body shell with continuous internal water channels. 5. INTERNAL BUBBLE TRAP BAFFLES: - 2 internal vertical baffle walls placed near the inlet side to degas incoming water and block micro-bubbles from reaching the probes.
Parameters
| Name | Value | Range |
|---|---|---|
| Width (X) | 150 mm | 100 – 250 |
| Depth (Y) | 55 mm | 40 – 100 |
| Height (Z) | 75 mm | 50 – 150 |
| Wall Thickness | 2.5 mm | 1.5 – 5 |
| Bracket Length | 15 mm | 10 – 30 |
| Bracket Drop | 35 mm | 20 – 60 |
| Bracket Thickness | 4 mm | 2 – 8 |
| Probe Spacing | 23 mm | 15 – 40 |
| Probe Tilt Angle | 45 deg | 0 – 60 |
| Port Wall Thickness | 2 mm | 1 – 3 |
| Port Height Above Top | 25 mm | 15 – 40 |
| pH Probe ID | 13.5 mm | 8 – 20 |
| ORP Probe ID | 13.5 mm | 8 – 20 |
| Salinity Probe ID | 14 mm | 8 – 20 |
| Temperature Probe ID | 11 mm | 8 – 20 |
| Ground Probe ID | 13 mm | 8 – 20 |
| Barb Outer Diameter | 12.5 mm | 8 – 20 |
| Barb Inner Diameter | 8.5 mm | 4 – 15 |
| Barb Length | 25 mm | 15 – 40 |
| Baffle Thickness | 2 mm | 1 – 4 |
| Baffle Height | 50 mm | 20 – 70 |
| Baffle 1 X Position | 25 mm | 10 – 60 |
| Baffle 2 X Position | 50 mm | 20 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu