AP1000 Pressurized Water Reactor

1 views

Bounding box: 80 × 65.8 × 129 mm
Engine: 3D Printing B-rep
Parameters: 16
Published: November 8, 2026

Download

Free to download and use. See the terms.

The prompt

AP1000压水堆反应堆

Parameters

Name	Value	Range
Vessel outer diameter	56 mm	30 – 120
Cylindrical shell height	60 mm	20 – 200
Ground clearance under lower head	6 mm	2 – 40
Flange thickness	6 mm	3 – 15
Flange radial width	4 mm	1 – 12
Support skirt wall thickness	3 mm	2 – 8
Upper head dome height	22 mm	8 – 80
Hot leg nozzle diameter	16 mm	6 – 40
Cold leg nozzle diameter	13 mm	6 – 40
Nozzle protrusion length	12 mm	3 – 30
Hot leg height / shell height	0.75 mm	0.3 – 0.95
Cold leg height / shell height	0.55 mm	0.3 – 0.95
CRDM housing diameter	3.2 mm	2 – 6
CRDM protrusion above head	9 mm	3 – 25
Number of CRDM rings	4 mm	1 – 6
Rods added per ring	6 mm	3 – 12

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS