ANSI 80 chain sprocket with shaft and UCP bearings on base plate

2 views

Bounding box: 220 × 100 × 93.2 mm
Engine: 3D Printing B-rep
Parameters: 20
Published: October 31, 2026

Download

Free to download and use. See the terms.

The prompt

میخوام یک چرخ زنجیر سایز80 با 10 دندانه و سوراخ 20 برام رسم کنی که یک شفت از داخلش رد شده و دوطرفش یاتاقان ucp مناسب استفاده شده باشه کل این سازه روی یک صفحه باشه و ابعاد صفحه مهم نیست

Parameters

Name	Value	Range
Number of teeth	10 mm	6 – 40
Sprocket bore	20 mm	10 – 50
Chain pitch	25.4 mm	12.7 – 50.8
Roller diameter	15.88 mm	5 – 30
Sprocket thickness	12 mm	5 – 30
Hub diameter	40 mm	20 – 80
Hub length	20 mm	5 – 40
Shaft diameter	20 mm	10 – 40
Bearing bore clearance	0.3 mm	0 – 1
Bearing center spacing	60 mm	40 – 120
Bearing shaft center height from base	33.3 mm	20 – 60
Bearing base length	80 mm	40 – 160
Bearing base width	38 mm	20 – 80
Bearing base height	12 mm	5 – 30
Bearing housing OD	62 mm	30 – 100
Bearing housing length	34 mm	15 – 60
Shaft extension beyond bearing	12 mm	5 – 30
Plate thickness	10 mm	4 – 30
Plate width	100 mm	60 – 200
Plate length	220 mm	120 – 300

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS