Angled Slide Core Mechanism

1 views

Bounding box: 62.3 × 30 × 33.7 mm
Engine: 3D Printing B-rep
Parameters: 14
Published: November 2, 2026

Download

Free to download and use. See the terms.

The prompt

注塑模具斜抽滑块机构，单位mm； ZC竖直为开模方向；滑块（行位）滑动方向与ZC夹角16.5°；斜导柱Φ10，轴线与ZC夹角18.5°，有效长度19.5；楔紧块（铲基）锁紧斜面与ZC夹角20.5°；倒扣深度3.5363，抽芯行程6.036，限位行程6.6；只做示意装配：行位、斜导柱、铲基三件实体，不需要螺丝、耐磨块；输出STEP B-Rep实体

Parameters

Name	Value	Range
Slide direction angle from ZC	16.5 deg	0 – 45
Guide pin angle from ZC	18.5 deg	0 – 45
Wedge locking face angle from ZC	20.5 deg	0 – 45
Guide pin diameter	10 mm	6 – 16
Guide pin effective length	19.5 mm	10 – 40
Undercut depth	3.54 mm	1 – 10
Core pull stroke	6.04 mm	1 – 20
Limit stroke	6.6 mm	1 – 20
Slide block width X	40 mm	20 – 80
Slide block depth Y	30 mm	15 – 60
Slide block height Z	24 mm	10 – 50
Wedge block thickness	16 mm	8 – 30
Wedge block height	32 mm	10 – 60
Sliding clearance per side	0.25 mm	0.1 – 0.5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS