Brackets and mounts
Angled Rail Mount Bracket with Side Wood Brackets
- Bounding box
- 60.0 × 26.0 × 108.0 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- September 30, 2026
Download
Free to download and use. See the terms.
The prompt
remove the top flange, add mounting brackets on the side for the wood on top
Parameters
| Name | Value | Range |
|---|---|---|
| Main Thickness | 6 mm | 2 – 12 |
| Front Rail Angle | 15 deg | 0 – 45 |
| Cable Gap | 10 mm | 0 – 30 |
| Lower Margin | 15 mm | 5 – 50 |
| Upper Margin | 15 mm | 5 – 50 |
| Rail Gap | 8 mm | 2 – 20 |
| Rail 3U Spacing | 20 mm | 5 – 80 |
| Rail 1U Spacing | 20 mm | 5 – 80 |
| Main Body Depth | 60 mm | 20 – 120 |
| Foot Depth | 35 mm | 10 – 100 |
| Foot Front X | 0 mm | 0 – 30 |
| Foot Height | 8 mm | 2 – 20 |
| Rail Hole Diameter | 5 mm | 1 – 12 |
| Rail Hole Offset | 5 mm | 1 – 20 |
| Foot Hole Diameter | 4 mm | 1 – 10 |
| Support Strut Hole Diameter | 4 mm | 1 – 10 |
| Support Hole Z Offset | 8 mm | 2 – 20 |
| Support Hole X Offset | 8 mm | 2 – 30 |
| Support Hole X Spacing | 12 mm | 2 – 40 |
| Side Bracket X Start | 5 mm | 0 – 20 |
| Side Bracket Length X | 25 mm | 5 – 60 |
| Side Bracket Height Above Top | 20 mm | 5 – 50 |
| Side Bracket Overlap Below Top | 8 mm | 2 – 20 |
| Side Bracket Outward Extension | 10 mm | 2 – 25 |
| Side Bracket Y Overlap | 3 mm | 1 – 10 |
| Side Bracket Hole Diameter | 4 mm | 1 – 10 |
| Side Bracket Hole Z Offset | 8 mm | 2 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu