Everything else
Angled-Hole Base with Inserted Rod
- Bounding box
- 80.1 × 30.0 × 113.1 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- September 29, 2026
Download
Free to download and use. See the terms.
The prompt
Base: cylinder 30mm diameter × 12mm tall, fillet top edge 3mm. Cut two 4mm diameter holes 8mm deep into the top face, 10mm apart, each tilted 30° outward from vertical. Rod: cylinder 3.8mm diameter × 120mm long. Add a sphere 8mm diameter at one end.
Parameters
| Name | Value | Range |
|---|---|---|
| Base diameter | 30 mm | 10 – 100 |
| Base height | 12 mm | 2 – 50 |
| Top edge fillet radius | 3 mm | 0 – 6 |
| Hole diameter | 4 mm | 1 – 10 |
| Hole depth | 8 mm | 1 – 20 |
| Hole center spacing | 10 mm | 4 – 24 |
| Hole/rod tilt angle | 30 deg | 0 – 60 |
| Rod diameter | 3.8 mm | 0.5 – 10 |
| Rod length | 120 mm | 10 – 300 |
| Rod sphere diameter | 8 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm