Loading the interactive model…
Interactive 3D model of Android phone body with front camera and side buttonsEverything else
Android phone body with front camera and side buttons
10 views
- Bounding box
- 77.0 × 150.0 × 12.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Android phone body with camera on front side and buttons on the left side
Parameters
| Name | Value | Range |
|---|---|---|
| Body length (Y) | 150 mm | 100 – 200 |
| Body width (X) | 75 mm | 60 – 100 |
| Body thickness (Z) | 8 mm | 5 – 12 |
| Corner fillet radius | 10 mm | 2 – 15 |
| Camera hole diameter | 10 mm | 4 – 20 |
| Camera center offset from top edge | 15 mm | 5 – 50 |
| Volume button width (Y) | 8 mm | 4 – 15 |
| Volume button height (Z) | 12 mm | 8 – 25 |
| Button protrusion | 2 mm | 1 – 5 |
| Volume up button Y center | 55 mm | -75 – 75 |
| Volume down button Y center | 30 mm | -75 – 75 |
| Power button width (Y) | 8 mm | 4 – 15 |
| Power button height (Z) | 6 mm | 4 – 12 |
| Power button Y center | -40 mm | -75 – 75 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS