Brackets and mounts
AMUROVC 5.0 - exploded eight-thruster ROV
- Bounding box
- 9314.6 × 460 × 302.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 32
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Design a professional, competition-grade 3D CAD model of **AMUROVC 5.0 underwater ROV**. **Frame:** Compact rectangular open-frame aluminium structure (6061-T6), with strong cross-members and bolted joints. Determine optimal overall dimensions independently, using millimetres. **Thrusters: EXACTLY 8** - 4 horizontal vectored thrusters, mounted at 45° in the XY plane, one near each corner, with correctly mirrored orientations. - 4 vertical thrusters, mounted symmetrically with axes parallel to the Z-axis. - Give every thruster a separate realistic motor housing, protective duct and mounting bracket. - Ensure proper clearance and no component intersections. **Main Components:** - Central cylindrical waterproof electronics enclosure with removable end caps, O-ring grooves and cable penetrator provisions. - Front-facing camera with transparent hemispherical dome. - Upper symmetrical buoyancy modules. - Lower adjustable ballast mounting plate. - Cable clips and corrosion-resistant fasteners. - NO GRIPPER. **CAD Requirements:** - Create actual editable 3D geometry, not just a concept render. - Keep frame, thrusters, enclosure, camera, buoyancy and brackets as separate components. - Use realistic, manufacturable dimensions and practical bolted connections. - Maintain symmetry, compactness and easy maintenance. - Avoid unnecessary decorative parts. **Deliverables:** Complete assembled ROV, exploded assembly, isometric view, top/front/side views and dimensioned engineering drawings. Prioritize mechanical functionality, structural strength, underwater suitability and manufacturability over appearance. Use editable placeholder dimensions where specifications are unavailable. PROJECT: AMUROVC 5.0 – 8 THRUSTER VECTOR ROV.
Parameters
| Name | Value | Range |
|---|---|---|
| Station pitch along X | 480 mm | 310 – 650 |
| Fore to aft length | 460 mm | 440 – 490 |
| Port to starboard width | 380 mm | 360 – 400 |
| Overall frame height | 300 mm | 280 – 320 |
| Square rail section | 18 mm | 16 – 22 |
| Rail wall | 3 mm | 2 – 4 |
| Duct outside diameter | 90 mm | 86 – 96 |
| Duct axial length | 58 mm | 54 – 64 |
| Duct minimum wall | 3 mm | 2.5 – 4 |
| Sealed motor diameter | 32 mm | 28 – 36 |
| Bracket width | 44 mm | 40 – 48 |
| Bracket flange thickness | 5 mm | 4 – 7 |
| Flange and cap diameter | 180 mm | 176 – 186 |
| Tube face to face | 300 mm | 280 – 320 |
| Barrel wall | 6 mm | 5 – 8 |
| End plate thickness | 20 mm | 16 – 24 |
| Radial cable gland bore | 12.5 mm | 10 – 14 |
| Face seal groove width | 3.2 mm | 3 – 3.6 |
| Face seal groove depth | 1.9 mm | 1.7 – 2.1 |
| Dome outer diameter | 100 mm | 92 – 104 |
| Optical shell thickness | 3 mm | 2.5 – 4 |
| Camera body width | 34 mm | 30 – 38 |
| Float length | 300 mm | 280 – 320 |
| Float width | 70 mm | 66 – 76 |
| Float height | 60 mm | 54 – 66 |
| Ballast plate length | 300 mm | 280 – 320 |
| Ballast plate width | 120 mm | 112 – 128 |
| Plate thickness | 8 mm | 6 – 10 |
| Adjustment slot overall length | 60 mm | 46 – 68 |
| Cable passage diameter | 8 mm | 6 – 10 |
| Representative joint bolt nominal diameter | 5 mm | 5 – 6 |
| Representative bolt grip length | 25 mm | 20 – 32 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Hydraulic Wing and Flaperon Demonstrator
Create a parametric 3D CAD model of a hydraulic aircraft wing and movable flaperon based on the reference sketch. **Wing dimensions:** - 240 mm chord, 120 mm span, 48 mm thickness
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
