Brackets and mounts
Amphibious Trash-Collection Catamaran with Conveyor, Hopper, Sensors & Sorting Bins
- Bounding box
- 779.1 × 290.0 × 174.0 mm
- Engine
- Precision B-rep
- Parameters
- 34
- Published
- September 27, 2026
Download
Free to download and use. See the terms.
The prompt
Please build a high-detail industrial hard-surface design prototype of an amphibious catamaran hull for a trash-collection robot. The base consists of two wide, sealed buoyancy pontoons with a flat main deck connecting them. At the front, include a single wide, shallow-angle sloped intake ramp that rises gently to meet the main deck, and integrate a continuous conveyor belt along its surface. Additionally, design a large internal storage bay or hopper on the main deck connected to the ramp, along with visible sensor mounts and compartments on the deck for sorting organic, paper, and plastic waste, maintaining a clean white and cool-gray industrial aesthetic.
Parameters
| Name | Value | Range |
|---|---|---|
| Pontoon Length | 600 mm | 200 – 1200 |
| Pontoon Width | 120 mm | 40 – 300 |
| Pontoon Height | 80 mm | 30 – 200 |
| Tunnel Gap Between Pontoons | 40 mm | 10 – 150 |
| Deck Thickness | 8 mm | 3 – 30 |
| Coaming Height | 15 mm | 5 – 40 |
| Coaming Width | 10 mm | 3 – 30 |
| Mount Hole Diameter | 4 mm | 2 – 12 |
| Mount Hole Count | 3 | 1 – 8 |
| Ramp Angle | 15 deg | 5 – 45 |
| Ramp Lip Height (above base) | 40 mm | 10 – 200 |
| Track Pocket Clearance | 4 mm | 1 – 15 |
| Track Protrusion Below Pontoon | 10 mm | 2 – 30 |
| Track Pocket Depth | 6 mm | 2 – 20 |
| Grouser Cleat Count | 6 | 2 – 20 |
| Track Belt Width | 50 mm | 20 – 200 |
| Track Belt Length | 400 mm | 100 – 1000 |
| Conveyor Belt Width | 100 mm | 30 – 300 |
| Conveyor Belt Thickness | 10 mm | 3 – 30 |
| Hopper Length (along deck) | 200 mm | 100 – 400 |
| Hopper Width | 220 mm | 100 – 500 |
| Hopper Wall Height | 80 mm | 30 – 200 |
| Hopper Wall Thickness | 8 mm | 3 – 20 |
| Hopper Floor Thickness | 6 mm | 2 – 20 |
| Sensor Mount Base Size | 30 mm | 10 – 80 |
| Sensor Mount Base Height | 15 mm | 5 – 40 |
| Sensor Housing Diameter | 20 mm | 5 – 50 |
| Sensor Housing Height | 25 mm | 10 – 60 |
| Compartment Inner Length | 120 mm | 50 – 300 |
| Compartment Inner Width | 80 mm | 30 – 200 |
| Compartment Height | 50 mm | 20 – 150 |
| Compartment Wall Thickness | 6 mm | 2 – 20 |
| Compartment Divider Thickness | 4 mm | 2 – 15 |
| Compartment Floor Thickness | 5 mm | 2 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu