Brackets and mounts
Amphibious Quadcopter Drone - Exploded View
- Bounding box
- 1180.1 × 410.0 × 120.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Design a unique amphibious quadcopter drone for CAD. Overall dimensions: Body: 320 × 240 × 90 mm Motor-to-motor: 760 mm Arm length: 250 mm Arm width: 30 mm Create a futuristic biomimetic body inspired by a manta ray and stealth aircraft. Do NOT use a circular or rectangular body. The design must be symmetrical, lightweight, waterproof, and suitable for CNC machining. Include: • Waterproof center enclosure • Removable top cover • Pixhawk 6C mount • 4S LiPo battery compartment • ESC mounting • GPS mount • Power distribution board mount • Telemetry mount • Waterproof cable glands • Rear waterproof thruster mount • Four removable arms • 180° rotating motor mounts with 8 mm shaft and dual bearings Generate top, bottom, front, side, isometric and exploded CAD views with dimensions and mounting holes.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 100 mm | 50 – 200 |
| Body Length | 320 mm | 200 – 400 |
| Body Width | 240 mm | 150 – 300 |
| Body Height | 90 mm | 50 – 150 |
| Top Cover Thickness | 10 mm | 5 – 20 |
| Mount Plate Length | 250 mm | 150 – 300 |
| Mount Plate Width | 180 mm | 100 – 250 |
| Mount Plate Thickness | 5 mm | 3 – 10 |
| Battery Tray Length | 150 mm | 100 – 200 |
| Battery Tray Width | 50 mm | 30 – 80 |
| Battery Tray Height | 30 mm | 20 – 50 |
| Gland Diameter | 8 mm | 5 – 15 |
| Gland Length | 12 mm | 8 – 20 |
| Thruster Mount Length | 80 mm | 50 – 100 |
| Thruster Mount Width | 60 mm | 40 – 80 |
| Thruster Mount Height | 40 mm | 20 – 60 |
| Thruster Hole Diameter | 40 mm | 20 – 60 |
| Arm Length | 250 mm | 150 – 300 |
| Arm Width | 30 mm | 20 – 50 |
| Arm Height | 20 mm | 10 – 30 |
| Shaft Diameter | 8 mm | 5 – 15 |
| Bearing Outer Diameter | 15 mm | 10 – 25 |
| Bearing Width | 5 mm | 3 – 10 |
| Motor Mount Offset | 20 mm | 10 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent