Everything else
Aluminum Extrusion Base Frame with Angled Supports
- Bounding box
- 1350.0 × 720.0 × 819.2 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- August 28, 2026
Download
Free to download and use. See the terms.
The prompt
rectangular base using 80x40 alujminum extrusions with two angled 80x40 extrusions attached on the opposite long sides, these vertically oriented extrusions are are 787mm on the long edge and sit 78.5 degree angle from the recangular base. the shorter extrusions are inside of base rectangle. inside extrusions are 560mm and long ones are 1350mm. the rectangle is oriented with the short side touching the floor
Parameters
| Name | Value | Range |
|---|---|---|
| Profile Width | 80 mm | 20 – 120 |
| Profile Height | 40 mm | 10 – 80 |
| Long Side Length | 1350 mm | 500 – 3000 |
| Short Side Length | 560 mm | 200 – 1500 |
| Angled Extrusion Length | 787 mm | 200 – 2000 |
| Angle from Horizontal | 78.5 deg | 45 – 90 |
| Angled Support X Position | 0.5 | 0.1 – 0.9 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like