Plates and panels
Alpine ALP492 Recessed Paper Towel Dispenser & Waste Receptacle
- Bounding box
- 431.8 × 101.6 × 1422.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 49
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
Assemble all existing 3D components into one complete recessed paper towel dispenser and waste receptacle. - Align and connect all parts in their correct positions. - Assemble the main cabinet body, front panels, upper paper towel dispenser, lower waste bin compartment, doors, hinges, locks and internal components. - Ensure correct fit, orientation, clearances and realistic mechanical connections. - Attach all doors to the cabinet using hinges. Doors must be functional and able to open and close. - Keep all components inside the main cabinet structure where appropriate. - Do not leave any parts floating, separated or overlapping incorrectly. - Preserve the original dimensions, geometry, proportions and reference product design. - Do not redesign, add or remove components. - Create one complete assembled 3D model with all parts properly connected. - Keep individual components editable and maintain the assembly structure.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 431.8 mm | 250 – 700 |
| Overall height | 1422.4 mm | 700 – 2200 |
| Overall recess depth | 101.6 mm | 50 – 300 |
| Sheet metal thickness | 1.5 mm | 1.2 – 5 |
| Back panel thickness | 1.5 mm | 1.2 – 5 |
| Face flange width | 20 mm | 8 – 60 |
| Face flange thickness | 2.5 mm | 1.2 – 8 |
| Door panel width | 387.8 mm | 120 – 640 |
| Upper dispenser door height | 560 mm | 150 – 900 |
| Gap between the two doors | 12 mm | 2 – 60 |
| Door panel thickness | 1.5 mm | 1.2 – 6 |
| Door setback behind flange face | 2 mm | 0 – 25 |
| Door perimeter clearance | 1.5 mm | 0.5 – 8 |
| Door opening angle | 0 deg | 0 – 110 |
| Paper slot width | 170 mm | 40 – 320 |
| Paper slot height | 38 mm | 10 – 90 |
| Slot centre above upper door bottom | 90 mm | 30 – 320 |
| Waste opening width | 260 mm | 60 – 360 |
| Waste opening height | 180 mm | 40 – 420 |
| Opening top below lower door top | 100 mm | 20 – 420 |
| Lock barrel diameter | 20 mm | 10 – 44 |
| Lock barrel length | 24 mm | 8 – 70 |
| Lock bezel diameter | 26 mm | 10 – 54 |
| Lock bezel thickness | 2 mm | 0.8 – 8 |
| Door lock hole diameter | 20.2 mm | 8 – 44 |
| Lock centre from right door edge | 45 mm | 15 – 140 |
| Lock centre below door top | 60 mm | 20 – 260 |
| Lock cam width | 40 mm | 15 – 90 |
| Lock cam height | 10 mm | 4 – 30 |
| Lock cam thickness | 3 mm | 1.2 – 10 |
| Hinge leaf width | 25 mm | 10 – 70 |
| Hinge leaf thickness | 1.5 mm | 1.2 – 6 |
| Hinge knuckle diameter | 5 mm | 3 – 14 |
| Upper hinge length | 460 mm | 60 – 900 |
| Lower hinge length | 700 mm | 60 – 1100 |
| Dispensing throat width | 200 mm | 80 – 340 |
| Dispensing throat height | 48 mm | 16 – 130 |
| Dispensing throat depth | 45 mm | 10 – 92 |
| Throat wall thickness | 1.5 mm | 1.2 – 5 |
| Paper shelf width | 390 mm | 100 – 600 |
| Paper shelf depth | 80 mm | 20 – 95 |
| Paper shelf thickness | 1.5 mm | 1.2 – 5 |
| Shelf above upper door bottom | 220 mm | 40 – 500 |
| Waste bin width | 380 mm | 120 – 560 |
| Waste bin height | 480 mm | 80 – 800 |
| Waste bin depth | 84 mm | 20 – 95 |
| Waste bin wall thickness | 2 mm | 1.2 – 6 |
| Waste bin rim width | 4 mm | 0 – 20 |
| Waste bin rim height | 4 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Exploded 3-Storey Building Model with Engraved Room Numbers
Please modify the previous model with the following corrections to arrange it as a proper building with correct room numbering: 1. VERTICAL STACKING (Z-AXIS): Do NOT place the flo
Robocop Toy Pistol - One-Plate Packed
can you arrange it so we can print on fewest plates on bambu a1 mini