Brackets and mounts
All-Terrain Tracked Rover Assembly
- Bounding box
- 900.0 × 899.0 × 858.5 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- August 14, 2026
Download
Free to download and use. See the terms.
The prompt
A complete all-terrain tracked rover assembly, overall dimensions fitting within a 900 mm length, 900 mm width, and 900 mm height bounding box. Main Body: A central rectangular chassis box (700 mm length, 600 mm width, 350 mm height). Drivetrain & Tracks: Heavy-duty modular rubber crawler tracks on both sides, with the drive motors completely hidden and integrated inside the track housing structure. Suspension: Three distinct suspension mounts/brackets distributed evenly along each side of the chassis, covered by smooth protective outer housings for a clean aesthetic. Sensors & Housings: A 360-degree LiDAR unit mounted flat at the bottom underside of the front chassis. A raised, central pedestal or mast structure located on the top deck of the chassis box. Mounted at the very top of this raised mast, include a single, integrated, 360-degree rotatable turret enclosure that houses both the camera system and the ultrasonic sensor array.
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length | 700 mm | 300 – 900 |
| Chassis Width | 600 mm | 300 – 850 |
| Chassis Height | 350 mm | 150 – 500 |
| Track Assembly Length | 900 mm | 500 – 900 |
| Track Assembly Width | 150 mm | 80 – 250 |
| Track Assembly Height | 500 mm | 300 – 700 |
| Suspension Housing Length | 220 mm | 100 – 350 |
| Suspension Housing Width | 100 mm | 60 – 180 |
| Suspension Housing Height | 120 mm | 60 – 200 |
| LiDAR Unit Diameter | 120 mm | 50 – 250 |
| LiDAR Unit Height | 80 mm | 30 – 150 |
| LiDAR Front Position X | -220 mm | -340 – 0 |
| Mast Footprint X | 150 mm | 80 – 250 |
| Mast Footprint Y | 150 mm | 80 – 250 |
| Mast Height | 250 mm | 100 – 400 |
| Turret Enclosure Diameter | 300 mm | 100 – 450 |
| Turret Enclosure Height | 140 mm | 50 – 250 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent