Everything else
Alex Mallet Putter Head with Adjustable Sole Weight
- Bounding box
- 95.0 × 27.0 × 33.0 mm
- Engine
- Precision B-rep
- Parameters
- 34
- Published
- October 14, 2026
Download
Free to download and use. See the terms.
The prompt
Make it have an adjustable weight on the bottom and make my brand called Alex
Parameters
| Name | Value | Range |
|---|---|---|
| Head Width (heel-to-toe) | 95 mm | 40 – 160 |
| Head Depth (front-to-back) | 27 mm | 15 – 60 |
| Head Height | 25 mm | 10 – 50 |
| Corner Radius | 2 mm | 0 – 8 |
| Rear Cavity Width | 46 mm | 10 – 100 |
| Cavity Front Width | 22 mm | 4 – 60 |
| Cavity Depth | 16 mm | 4 – 40 |
| Cavity Floor Height | 8 mm | 2 – 20 |
| Alignment Groove Width | 2.2 mm | 0.5 – 6 |
| Alignment Groove Depth | 1.2 mm | 0.2 – 4 |
| Face Insert Pocket Width | 40 mm | 5 – 80 |
| Face Insert Pocket Height | 12 mm | 2 – 25 |
| Face Insert Pocket Depth | 3 mm | 0.5 – 8 |
| Face Insert Pocket Centre Height | 12 mm | 2 – 40 |
| Hosel Diameter | 14 mm | 6 – 25 |
| Hosel Height | 12 mm | 4 – 30 |
| Hosel X Position | -33 mm | -70 – 0 |
| Hosel Y Position | -3 mm | -20 – 20 |
| Shaft Bore Diameter | 9.5 mm | 3 – 20 |
| Weight Diameter | 16 mm | 5 – 30 |
| Weight Thickness | 8 mm | 3 – 20 |
| Sole Pocket Depth | 5 mm | 1 – 15 |
| Radial Clearance Gap | 0.4 mm | 0.1 – 2 |
| Weight Seating Overlap | 1 mm | 0.3 – 3 |
| Weight X Position | 0 mm | -30 – 30 |
| Weight Y Position | 0 mm | -20 – 20 |
| Hex Socket Across Flats | 5 mm | 2 – 12 |
| Hex Socket Depth | 3 mm | 1 – 10 |
| Brand Letter Height | 6 mm | 2 – 14 |
| Brand Stroke Width | 1.2 mm | 0.4 – 3 |
| Brand Letter Spacing | 1.8 mm | 0.5 – 6 |
| Brand Emboss Height | 0.6 mm | 0.2 – 2 |
| Brand X Position | 20 mm | -40 – 40 |
| Brand Y Position | 6.5 mm | -15 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm