Alcove Make-up Desk with Pigeonhole Drawers

I want to design a make-up desk in an alcove. The desk needs to be 1080 mm wide and 500 mm deep that is the surface. The surface will be 30 mm thick in oak now underneath the surface will be two cabinets either side both 500 mm height and 400 mm wide. Those are the external measurements of the cabinets the cabinet thickness will be 18 mm MRMDF. Both of these cabinets will have pigeonhole drawers with half moon shape cut out at the top of the drawers to allow you to pull them out. The size of these drawers will be determined on the internal measurement of the cabinets so 400 mm -18-18 and then 500 mm -18-18 the height divided by 4 to have four drawers .now there will be a wide drawer underneath the surface between the two cabinets this drawer will sit above your knees but flush with the underneath of the surface. This draw will be shallow so 100 mm high the width of the drawer will be determined by the spacing between the two cabinets either side and then the depth will be 300 mm again this will have a half moon shape cut out but there will be two on the drawer both on the top edge 100 mm in from both sides. This will be painted in a off pink colour as well as the two cabinets either side and the drawers the only thing that is not painted off pink is the surface which will be oak.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.