Gears and transmission
Airplane Backpack Charm
- Bounding box
- 17 × 23.6 × 2 mm
- Engine
- 3D Printing B-rep
- Parameters
- 5
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Create a premium minimalist airplane charm for a travel backpack keychain. Design: - A classic passenger airplane viewed directly from above. - Clearly recognizable fuselage, wings, tail wings and nose. - Elegant, balanced proportions. - Smooth, slightly rounded outer contours. - No windows, no text, no logos and no additional decorations. - Minimalist solid silhouette. Technical specifications: - Airplane body: 20 mm long and approximately 17 mm wide. - Material thickness: 2 mm. - Integrated circular hanging loop at the rear of the airplane. - Hanging loop: 4 mm outer diameter and 2 mm inner diameter. - The loop must be additional to the 20 mm airplane body length. - All parts must be connected. - No fragile or extremely thin sections. - Solid, watertight geometry suitable for professional 3D printing. - All dimensions in millimeters. - Export-ready STL file.
Parameters
| Name | Value | Range |
|---|---|---|
| Fuselage length | 20 mm | 10 – 60 |
| Wing span | 17 mm | 10 – 60 |
| Material thickness | 2 mm | 1 – 6 |
| Hanging loop outer diameter | 4 mm | 3 – 12 |
| Hanging loop inner diameter | 2 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled