Everything else
Air Vent Sleeve
- Bounding box
- 112.3 × 117.7 × 65.1 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- August 8, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a parametric STL model for a single air vent sleeve. DIMENSIONS: 112mm Width, 58mm Height, 65mm Depth. CONSTRAINTS: 1. Refer to manufacturer part A2038300354 for exact snap-fit groove locations. 2. Wall thickness must be a uniform 2.0 mm. 3. Front face must have an R850 mm convex radius to blend with the dash. 4. Add a 1.5mm thick decorative lip on the top and bottom, but keep left/right edges flush.
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 112 mm | 50 – 200 |
| Height | 58 mm | 20 – 150 |
| Depth (max at center) | 65 mm | 10 – 150 |
| Wall Thickness | 2 mm | 0.5 – 5 |
| Front Convex Radius | 850 mm | 200 – 2000 |
| Snap Groove Width (Z) | 5 mm | 2 – 15 |
| Snap Groove Height (Y) | 10 mm | 2 – 30 |
| Snap Groove Depth | 1 mm | 0.2 – 1.5 |
| Groove Y Offset from Edges | 10 mm | 2 – 30 |
| Groove Z Position | 30 mm | 5 – 50 |
| Lip Length (X) | 108 mm | 50 – 110 |
| Lip Protrusion (Z) | 1.5 mm | 0.5 – 4 |
| Lip Vertical Height | 1.5 mm | 0.5 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like